Fulgor Milano FCO 9013 TM BK - Инструкция по эксплуатации - Страница 72

EN

32

18 - Oven Care and Cleaning

Abrasive detergents and steam cleaning equipment should not 

be used for cleaning.

WARNING

Do not use harsh abrasive cleaners or sharp metal scrapers 

to clean the oven door glass since they can scratch the 

surface, which may result in shattering of the glass.

Clean

Assisted cleaning

High temperature cycle (250°C), combined with self-cleaning 

panels for gentle, non-invasive cleaning of the cooking 

chamber.

Correct operation is combined with the use of the lateral 

panels and catalytic fan cover: the oven is treated with  special 

enamel with a micro-porous structure, which breaks down the 

fat projected thanks to a catalytic oxidisation process which 

transforms residues into gaseous products. 

The turbo clean function is only activated when no cooking 

function has been selected, so: switch on the oven and touch 

the symbol as shown in the figure for five seconds.

WARNING

The cleaning process takes place at a temperature of 250°C 

and lasts one hour. Do not use it for cooking food!!

The oven light is activated and can be switched off and on 

again at any time.

All the self-cleaning panels will perform effectively for thirty 

cleaning processes, after this limit the panels must be replaced. 

The panels should be cleaned exclusively with tap water and 

replacements can be ordered from your specialised dealer.

Removing the door

WARNING

Make sure that:
• The oven is cool and power to the oven has been turned 

off before removing the door. Failure to do so could result 

in electrical shock or burns. 

• The oven door is heavy and fragile. Use both hands to 

remove the oven door. The door front is glass. Handle 

care-fully to avoid breakage. 

• Grasp only the sides of the oven door. Do not grasp the 

handle as it may swing in your hand and cause damage 

or injury. 

• Failure to grasp the oven door firmly and properly could 

result in personal injury or product damage. 

Removing the standard oven door

The oven door can be removed quickly and easily. To do so, 

proceed as follows:
• Open the door fully.
• Lift the two levers shown below.
• Close the door as far as the first stop (caused by the raised 

levers).

• Lift the door upwards and outwards to remove it fromits 

mountings.

To replace fit the door, fit the hinges in their mountings and 

lower the two levers