De Dietrich DOP8574A - Инструкция по эксплуатации - Страница 26

26

PYROLYTIC SELF-CLEANING

This  oven  is  equipped  with  a  pyrolytic 

self-cleaning function:

Pyrolysis  is  a  cycle  during  which  the 

oven cavity is heated to a very high 

temperature in order to eliminate soiling 

from splattering and spills.

Before starting pyrolysis cleaning, 

remove any large overspills, if any. 

Remove the excess grease on the door 

using a damp sponge. 

As a safety measure, cleaning only 

occurs after the door locks automatically; 

it is impossible to unlock the door.

PERFORM A SELF-CLEANING 

CYCLE

Three pyrolysis cycles are proposed. 

The durations are pre-selected and 

cannot be modified:

Express Pyro: in 59 minutes

This specific function uses the heat 

built up during a previous cooking 

cycle to quickly and automatically 

clean the inside of the oven: it cleans 

a mildly dirty oven interior in less than 

an hour.

The electronic oven temperature 

m o n i t o r   d e t e r m i n e s   w h e t h e r   t h e 

residual heat remaining in the oven 

interior is sufficient to provide a good 

cleaning result. If this is not the case, 

a 90-minute pyrolysis cycle will 

automatically begin.

 Auto Pyro: between 

 1:30 and 2:15

for cleaning to save energy.

 Turbo Pyro: in 2:00

for more in-depth cleaning of the inside 

of the oven.

IMMEDIATE SELF CLEANING 

- Select the «CLEANING» function when 

you are in the general menu then confirm. 

- Select the most suitable self cleaning 

cycle, for example Turbo Pyro, and 

confirm.

The pyrolysis cycle begins. The time 

starts  to  count  down  immediately  it  is 

set.

During pyrolysis, the 

 symbol is 

d i s p l a y e d   i n   t h e   p r o g r a m m e r   t o 

indicate that the door is locked.

At the end of the pyrolysis cycle,  0:00 

flashes.

There is a 30 minute cooling phase 

after each pyrolysis and your oven 

remains unavailable during this time.

Remove the accessories and 

supports from the oven before 

beginning pyrolysis cleaning.

Before 

starting a pyrolysis cleaning cycle, 

make sure that any accessories that 

are not pyrolysis safe have been 

removed from the oven (sliding rails, 

baking trays, chrome-plated grills, 

and so on) as well as any cookware.

“CLEANING” FUNCTION 

(the cavity)

• 

5

 CARE