Bertazzoni F30PROXT - Инструкция по эксплуатации - Страница 6

6

inadequacy of an effective grounding system or the failure to adhere to national and 
local electrical codes.  

The oven should not to be operated until it has been properly installed. 

Installation, maintenance and repair work should be performed by a factory 
authorized service technician. Work by unqualified persons could be dangerous and 
may void the warranty.  

Before installation or service, disconnect the power supply to the work area by 
removing the fuse, tripping the circuit breaker or shutting off the power main.  

WARNING! ELECTRICAL SHOCK HAZARD! 

Disconnect electrical power at the circuit breaker box or fuse box before installing 
the appliance.  

Provide appropriate grounding for the appliance. 

Use copper conductors only. 

Failure to follow these instructions could result in serious injury or death 

CAUTION! 

Label all wires prior to disconnecting when servicing controls. Wiring 

errors can cause improper and dangerous operation.

Verify proper operation after servicing. 

Oven use 

WARNING! Ovens can produce high temperatures that can cause burns. 

Prevent children from touching the appliance while in use.  

Use heat-resistant potholders when placing items in the oven, turning them, or 
removing them from the oven. The upper heating element and oven racks can 
become very hot and cause burns. 

To prevent burns, always place oven racks at their desired height while the oven is 
cool. 

Open the door carefully to allow hot air or steam to escape before placing or 
removing food. 

To prevent burns, allow the heating element to cool before cleaning by hand. 

During the self cleaning function the oven will become very hot. Prevent children 
from coming in contact with the oven.  

Remove all accessories from the oven before starting a self-clean cycle. The high 
temperatures needed for this program will damage the accessories.  

The door gasket is essential for a good seal. Care should be taken not to wear, 
damage or remove the gasket. 

Only clean parts listed in this manual. 

CAUTION: Heating elements may be hot even though they are not glowing. 
During and after use, do not let clothing or other flammable materials come in 
contact with heating elements or interior surfaces of the oven until they have 
had sufficient time to cool. External parts of the oven such as the door glass, 
vents, and the control panel can become hot.  

Do not block the exhaust vents.  

Aluminum foil should not be used to line the bottom of the oven cavity.  

Do not place pots, pans or baking sheets directly on the bottom of the oven 
cavity.  

Do not slide pots or pans on the oven floor. This could scratch and damage the 
surface enamel. 

Do not let metal objects (aluminium foil, pans) or the meat probe come in contact 
with the heating element. 

Do not sit or step on the oven door. 

Do not place heavy items on the open oven door.