АТС Samsung NX-308 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
1. INTRODUCTION TO PROGRAMMING
1.1 PROGRAMMING OVERVIEW
The system arrives from the factory with default data entered. Connect it to
trunks, stations, and power, turn the system on and it is fully operational. The
only thing left to do is customize the data to fit the customer's needs. This is
called programming the system.
MMC stands for Man Machine Code, and each program is assigned a different
two digit code. MMCs are used to view, create, or change customer data.
Programming is simply deciding what needs to be done and knowing which
MMC is used to do it.
System programming may be done from any NX-24E or NX-12E keyset (Refer to
1.3.1) or any keyset with LCD (Refer to 1.3.2). The first thing to is open system
programming. As a security measure, a passcode must be known to do this.
1.2 PROGRAMMING LEVELS
There are three levels of programming: SYSTEM, CUSTOMER and STATION.
S y s t e m a n d C u s t o m e r l e v e l s a r e u n d e r p a s s c o d e p r o t e c t i o n w h i l e s t a t i o n
programming does not require a passcode.
To prevent conflicting data from being entered, only one person at a time can
e n t e r p r o g r a m m i n g w i t h t h e t e c h n i c i a n o r c u s t o m e r p a s s c o d e . W h i l e
programming is in progress, normal system operation is not affected.
SYSTEM LEVEL
This level is entered via MMC 20 and requires the Technician Level passcode.
It allows access to all system, station, and maintenance programs.
CUSTOMER LEVEL
This level is entered via MMC 20 and requires the Customer passcode. It allows
access to station and system programs assigned by the Technician Level in
MMC 90. When using the customer passcode to access station programs, data
for all stations can be viewed or changed.
STATION LEVEL
A l l k e y s e t s c a n a c c e s s s t a t i o n p r o g r a m s 1 0 t h r o u g h 1 7 w i t h o u t u s i n g a
passcode. Each user can only change data for his/her own keyset.
NX-SERIES
HYBRID KEY SYSTEM
PROGRAMMING SECTION
4 - 1
4Programmi ng 1999.9.15 12:42 PM 페이지5
