АТС Samsung NX-308 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
This MMC is used to assign members of a station group. There are several options that
can be selected for ringing, overflow, group transfer and overflow destination, and group
type. There may be a maximum twenty (20) groups.
OPTIONS
DISPLAY
RANGE
Ring mode
RING
Overflow time
OVER
000
～
250 sec
Group transfer time
TRSF
000
～
250 sec
Overflow port
NEXT
Group types
TYPE
RING MODES
DESCRIPTION
1 SEQUENTIAL
The first idle station listed in the group will ring. If the first is busy,
the next idle station will ring.
2 DISTRIBUTE
The first call will ring the first station listed in the group.
The next call will ring the next station listed in the group.
3 CONDITION
All the stations but non-busy stations listed in the group will ring.
4 UNCONDITION
All the stations listed in the group will ring. Busy stations will
receive off-hook ring.
GROUP TYPES
1
NORMAL GROUP
2
VMAA GROUP
PROCEDURE
LCD DISPLAY
1. Press [TRANSFER] and dial 35
Display shows ring mode of Operator group 500.
2. Using [VOLUME (-) or (+)], select a station group
number (500
～
519).
3. Press [REDIAL] or [FLASH] to select options
(RING, OVER, TRSF, NEXT, TYPE, MEMBER)
4a. Press [MUTE] or [MESSAGE] to select ring mode
OR
Dial
1 for SEQUENTIAL
2 for DISTRIBUTE
3 for CONDITION
or 4 for UNCONDITION
4b. To change the OVERFLOW TIME, enter 3 digits of
OVERFLOW TIME
4c. To change the GROUP TRANSFER TIME, dial 3 digits
of GROUP TRANSFER TIME
NX-SERIES
HYBRID KEY SYSTEM
PROGRAMMING SECTION
MMC 35
ASSIGN STATION GROUP
4Programmi ng 1999.9.15 12:43 PM 페이지35
