АТС Samsung NX-308 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
This MMC is used to adjust individual timers as necessary. All available timers are
described in the TABLE OF TIMERS AND VALUES.
NOTE: Seconds are shown as 'SEC', milliseconds as 'MS', and minutes as 'MIN'.
PROCEDURE
LCD DISPLAY
1. Press [TRANSFER] and dial 50
2. Press [VOLUME (-) or (+)] to select a timer
(e.g. ALM R DUR)
3. Enter new value using KEYPAD
4. Press [TRANSFER] to save and exit
DEFAULT DATA
See TABLE OF TIMERS AND VALUES
RELATED MMC
NONE
TABLE OF TIMERS AND VALUES
DISPLAY
DESCRIPTION
DEFAULT RANGE
ALM R INT
controls the time length between ring attempts
025SEC
250SEC
(Alarm ring
at a station when alarm reminder is set.
interval)
ALM R DUR
controls the length of ring cycle duration when
010SEC 1~250SEC
(Alarm ring
alarm reminder is set at a station.
duration)
ARDL INT
controls the time between attempts after Auto
045SEC 1~250SEC
(Auto Redial
Redial is set 'ON' at a station.
interval)
ARDL RELS
controls the duration of a Ring No Answer
045SEC 1~250SEC
(Auto Redial
condition on an auto-redial number dialed
release time)
before auto redial is canceled.
CBACK NOA
controls the time before the callback is canceled
030SEC
1~250SEC
(Callback no
when a callback detects Ring No Answer
answer time)
CO CO DIS
monitors the duration of an unsupervised
010MIN
1~250MIN
(CO to CO
conference, external call forward, or DISA call.
disconnect
upon expiring, both trunks are disconnected.
time)
DISA F DG
controls how long the system will wait for
025SEC 1~250SEC
dialing to begin the DISA incoming call.
DISA I DG
controls the grace period between dialing valid
025SEC 1~250SEC
digits before dropping the call to DISA user.
DISA RING
controls no answer time for DISA internal calling.
030SEC 1~250SEC
DOOR RELS
controls the duration of time before the door
1500MS
100~
(Door release lock relay deactivates.
2500MS
time)
NX-SERIES
HYBRID KEY SYSTEM
PROGRAMMING SECTION
MMC 50
SYSTEM TIMERS
4Programmi ng 1999.9.15 12:43 PM 페이지48
