АТС Samsung NX-308 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
EXECUTIVE BARGE-IN (Override)
The feature allows specially-programmed stations to override the automatic
privacy of another station. Programming provides three options: No Barge-in,
With Tone, and Without Tone. When programmed without tone, the barging-in
keyset has its microphone muted. Each station can also be programmed as
secure or not secure. Secure stations cannot be barged-in on. A non-secure
station talking to a secure station cannot be barged-in on. Each station may also
be programmed to enable or disable barge-in.
➥
MMC 24 ASSIGN BARGE-IN
EXTERNAL MUSIC INTERFACE
The system provides internal music on hold (MOH) in the form of a chime. There is
also an input for an external audio source. An RCA style phono jack is provided on
the Base board for a customer-provided source for music on hold and background
music to keysets. Source selection is made via a Base board jumper.
EXTERNAL PAGE INTERFACE
A 600 ohm voice pair is provided for connection to a customer-provided paging system.
FLASH KEY OPERATION
While on an outside line, pressing the FLASH key will flash the central office or
P B X . T h i s i s u s e d t o a c t i v a t e c u s t o m c a l l i n g f e a t u r e s o n C . O . l i n e s o r i n
c o n j u n c t i o n w i t h C e n t r e x / P B X o p e r a t i o n . S y s t e m p r o g r a m m i n g a l l o w s
adjustment of flash times for C.O. and PBX lines.
➥
MMC 53 TRUNK WIDE TIMERS
⇒
NEW CALL: 600 msec
FLASH PBX: 600 msec
FLEXIBLE NUMBERING
System programming allows each station a programmable two- or three-digit
station number. Re-assignment of these numbers will affect the trunk numbers
and other feature IDs.
➥
MMC 70 DIAL NUMBERING PLAN
FLEXIBLE RINGING
Incoming outside calls can be assigned to ring a station or a station group. The
system provides separate ringing locations for all trunks in both the DAY and the
NIGHT modes.
➥
MMC 43 ASSIGN TRUNK RING
HOT/WARM LINE
Stations can be programmed to call a pre-defined station, station group, outside
NX-SERIES
HYBRID KEY SYSTEM
FEATURES SECTION
3 - 7
3feature 1999.9.15 12:44 PM 페이지11
