Falmec QUASAR 80 - Инструкция по эксплуатации - Страница 20

20

 MAINTENANCE

Before cleaning or carrying out maintenance operations, discon-
nect the equipment by removing the plug or switching off the 
main switch.

Do not use detergents containing abrasive, acidic or corrosive substances 
or abrasive cloths.

Regular maintenance guarantees proper operation and performance over time.
Special attention is to be paid to the 

metal anti-grease filters :

 frequent clean-

ing of the filters and their supports ensures that no flammable grease is accu-
mulated.

CLEANING OF EXTERNAL SURFACES

You are advised to clean the external surfaces of the hood 

at least once every 

15 days 

to prevent oily substances and grease from sticking to them. To clean 

the brushed stainless steel hood, the Manufacturer recommends using "Magic 
Steel" wipes.
Alternatively 

and for all the other types of surfaces

, it can be cleaned using a 

damp cloth, slightly moistened with mild, liquid detergent or denatured alcohol.
Complete cleaning by rinsing well and drying with soft cloths. 

Do not use too much moisture or water around the push button 
control panel and lighting devices in order to prevent humidity 
from reaching electronic parts.

The glass panels can only be cleaned with specific, non-corrosive or non-abra-
sive detergents using a soft cloth.
The Manufacturer declines all responsibility for failure to comply with these in-
structions.

CLEANING OF INTERNAL SURFACES

Do not clean electrical parts, or parts related to the motor inside 
the hood, with liquids or solvents.

For the internal metal parts, see the previous paragraph.

METAL ANTI-GREASE FILTERS

It is advised to 

frequently

 wash the metal filters (

at least once a month

) leaving 

them to soak in boiling water and cleaning solution for 1 hour, taking care not 
to bend them.
Do not use corrosive, acid or alkaline detergents.
Rinse them well and wait for them to be completely dry before reassembling 
them.
Washing in a dishwasher is permitted, however, it may cause the filter material to 
darken: to reduce the possibility of this problem from happening, use low-tem-
perature washes (55°C max.).
To extract and insert the metal anti-grease filters see the assembly instructions.

ACTIVE CARBON FILTERS

These filters retain the odours in the air that passes through them. The purified 
air is recirculated into the environment.
The active carbon filters must be replaced on average every 3-4 months under 
normal conditions of use.
See assembly instructions to replace the active carbon filters.

LIGHTING

The range hood is equipped with high efficiency, low consumption LED spotli-
ghts with an extremely long life-span under normal use conditions.
Should the LED spotlight need to be replaced, proceed as shown in the figure.

12V

3

1

2

GREASE DRIP TRAY

It is recommended to empty out the drip tray every 15 days and to wash it with 
boiling hot water and dish detergent. Do not use corrosive, acid or alkaline de-
tergents. Rinse it well and wait for it to be completely dry before reassembling it.
To remove the grease drip tray, (see figure).

3

2

1

 DISPOSAL AFTER END OF USEFUL LIFE

The crossed-out trash or refuse bin symbol on the appliance means 
that 

the product is WEEE

, i.e. “Waste electrical and electronic equip-

ment'', accordingly 

it must not be disposed of with regular unsor-

ted waste

(i.e. with ''mixed household waste''), but it must be disposed of sepa-

rately so that it can undergo specific processing for its re-use, or a specific 
treatment, to remove and safely dispose of any substances that may be harmful 
to the environment and remove the raw materials that can be recycled. Proper 
disposal of these products contributes to saving valuable resources and avoid 
potential negative effects on personal health and the environment, which may 
be caused by inappropriate disposal of waste.
You are kindly asked to contact your local authorities for further information 
regarding the designated waste collection points nearest to you. Penalties for 
improper disposal of such waste can be applied in compliance with national 
regulations.

INFORMATION ON DISPOSAL IN EUROPEAN UNION COUNTRIES

The EU WEEE Directive was implemented differently in each country, accordin-
gly, if you wish to dispose of this appliance we suggest contacting your local 
authorities or dealer to find out what the correct method of disposal is.

INFORMATION ON DISPOSAL IN NON-EUROPEAN UNION COUNTRIES

The crossed-out trash or refuse bin symbol is only valid in the European Union: if 
you wish to dispose of this appliance in other countries, we suggest contacting 
your local authorities or dealer to find out what the correct method of disposal is.

WARNING!

The Manufacturer reserves the right to make changes to the equipment at any 
time and without prior notice. Printing, translation and reproduction, even par-
tial, of this manual are bound by the Manufacturer's authorisation. 
Technical information, graphic representations and specifications in this manual 
are for information purposes and cannot be divulged.
This manual is written in Italian. The Manufacturer is not responsible for any tran-
scription or translation errors.