Faber Lithos EG6 WH A45 - Инструкция по эксплуатации - Страница 8

EN 

8

8 

INSTALLATION

Drilling the Wall 

373

105

150 150

12a

Mark the following on the wall: 
•  a vertical line up to the ceiling or surface above the hood, at the centre of the area in which 

the hood itself is to be fitted; 

•  a horizontal line at: 650 mm min. above the Hob; 
•  Rest the Bracket 

7.2.1

 as indicated, 1-2 mm from the ceiling or surface above the hood, 

aligning its centre (grooves) with the vertical reference line. 

•  Mark the centres of the holes in the bracket. 
•  Rest the Bracket 

7.2.1

 as indicated, X mm under the first bracket (X = height of the Upper 

chimney provided), aligning its centre (grooves) with the vertical reference line. 

•  Mark the centres of the holes in the bracket. 
•  Mark a reference point as indicated at 105 mm from the horizontal reference line. 
•  Drill the points marked using an ø 8 mm bit. 
•  Insert the plugs 

11

 into the holes. 

•  Fix the Brackets, using the screws 

12a

 (4.2 x 44.4) provided. 

•  As indicated above, mark a reference point 373 mm above the horizontal reference line, and 

150 mm to the right of the vertical reference line. 

•  Repeat this operation on the opposite side, checking to ensure it is level. 
•  Drill the points marked using an ø 12 mm bit. 
•  Insert the plugs, screws and bracket 

11a

 into the holes, and fasten.