Винные шкафы Liebherr WTEes 2053 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

u
This is normal in energy-saving models.
A bubbling and gurgling sound
→
This sound comes the refrigerant flowing in the refrigeration
circuit.
u
The sound is normal.
A faint clicking sound
→
The sound is always produced when the refrigeration unit (the
motor) automatically switches on or off.
u
The sound is normal.
A hum. It is briefly a little louder when the refrigeration unit
(the motor) switches on.
→
The refrigeration increases automatically when fresh food
has just been placed in the appliance or the door has been
left open for a while.
u
The sound is normal.
→
The ambient temperature is too high.
u
See section on range of appliance use
A low hum
→
The sound is caused by the fan air flow.
u
The sound is normal.
Noise of the soft stop mechanism.
→
The appliance has a high-quality soft stop mechanism due to
the heavy glass door. Flow noise or clicking may occur when
the door is opened and closed.
u
The sound is normal.
Mould on the wine bottles
→
Similarly as in other forms of storage, a little mould may form
depending on the type of label adhesive.
u
Remove residual adhesive.
The temperature display reads:
F0
to
F5
.
→
There is a fault.
u
Contact the customer service. See the section on mainte-
nance.
The temperature is not cold enough.
→
The door of the appliance is not properly closed.
u
Close the appliance door.
→
Insufficient ventilation.
u
Clear ventilation grilles.
→
The ambient temperature is too high.
u
See the section on the range of appliance use.
→
The appliance was opened too frequently or for too long.
u
Wait until the appliance reaches the required temperature it-
self. If not, contact the customer service. See the section on
maintenance.
→
The temperature is incorrectly set.
u
Set to a colder temperature and check after 24 h.
→
The appliance is too close to a heat source.
u
See the section on installation.
The interior light is not on.
→
The appliance is not switched on.
u
Switch on the appliance.
→
The LED interior light is faulty or the cover is damaged.
WARNING
Risk of injury due to electric shock!
Live parts are located under the cover.
u
Have the LED interior light replaced or repaired only by the
customer service or by qualified personnel trained for the pur-
pose.
WARNING
Danger of injury due to laser radiation, class 1M.
u
Do not look inside when the cover is open.
8 Decommissioning
8.1 Switching off the appliance
u
Press On/Off button
Fig. 3 (10) for about 2 s.
w
The temperature display is dark.
8.2 Taking out of service
u
Empty the appliance.
u
Pull out the plug.
u
Clean the appliance (see section on cleaning).
u
Leave the door open to prevent odour.
9 Disposing of the appliance
The appliance contains some reusable materials
and should be disposed of properly - not simply with
unsorted household refuse. Appliances which are no
longer needed must be disposed of in a professional
and appropriate way, in accordance with the current
local regulations and laws.
When disposing of the appliance, ensure that the refrigeration
circuit is not damaged to prevent uncontrolled escape of the re-
frigerant it contains (data on type plate) and oil.
u
Disable the appliance.
u
Pull out the plug.
u
Cut through the connecting cable.
Decommissioning
11
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)