Велокомпьютеры VDO Z1 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
30
EN
No cadence display
- Check the magnet position
(distance between magnet
and transmitter, position of the
magnet to the transmitter point
on the transmitter)
- Check the battery in the
transmitter
- Check the battery in the
computer (if battery voltage is
insuf
fi
cient then the receiver
cannot receive the signals)
No speed display (dash in the
display)
The receive channel for speed is
switched off (a 15-minute period
has elapsed without receiving a
speed signal)
Press buttons
¥
+
ç at the
same time
No cadence data (dash in the
display)
The receive channel for cadence
is switched off (a 15-minute
period has elapsed without
receiving cadence signals)
Press buttons
¥
+
ç at the
same time
Watt display does not function
- Personal data has not been set
- Watt settings have not been
made
- Cadence transmitter is not
installed
- Cadence transmitter does not
function
Screwdriver is
fl
ashing on the
display
Service interval for your bicycle
is displayed. Take your bicycle
in for service or perform the
service yourself
Walking shoe is shown in the
display (bicycle distance data is
no longer displayed) £
Walk mode is switched on.
In walk mode certain bike
functions are not available
The timer indicator is
fl
ashing
A timer is still running.
Bell icon is displayed
An alarm is set (alarm time)
