Fulgor Milano FSH 804 ID TS BK - Инструкция по эксплуатации - Страница 27

27

GB

Key

This cooking surface allows setting a keypad 
lock using the lock button (6). It may be 
useful to lock the keypad during operation, 
for example for cleaning the control area or, 
in any case, if you do not want to change 
any settings.
The On/Off button (1) still has priority.

Pause

This cooking surface allows setting a pause 
(4) during cooking (which is useful, for 
example, when answering a phone call). 
When this function is pressed, an LED 
lights above the button and the symbol “II” 
is displayed in all the cooking areas and the 
cooking settings and timers are frozen for 
a maximum of 10 minutes, after which the 
cooking surface turns off.

Deactivating Pause

Once activated, the functioncan be 
deactivated by pressing the pause button 
(4) again. The icon (3) flashes and you must 
select a cursor area within 10 seconds. 
This allows the surface to resume cooking 
and the timer starts from the same point at 
which it was stopped.

Timer function

There are two versions of the timer function:
- An independent timer from 1 to 99 

minutes: it beeps when the time has run 
out. This function is available even when 
the cooking areas are on.

-  A timer from 1 to 99 minutes for each 

cooking area: it beeps when the time has 
run out and turns off the cooking area 
where it was set. The 4 cooking areas can 

be programmed independently.

The timer starts with a default time of 10 
minutes and the timer selection point (13) 
is active in the cursor area. When you touch 
the 
minimum level (16), the time decreases and 
when you touch the maximum level (17), it 
increases.
The type of timer activated is shown in the 
dedicated displays (10-12) and the timer 
with the least time left is highlighted. If the 
least time is related to an independent timer, 
the time is simply displayed without any 
particular indication while, if the least time 
is realted to a cooking area timer, the timer 
icon (24) flashes together with the related 
indicator light (8-9-14-15). The other timer 
settings are still active and running, but will 
have a clock icon (24) lit but not flashing.
Just the separator dot (13) is lit when the 
timer is selected and modifiable.

Independent timer

- If the touch display is on and all the cooking 
areas are at level “0”, the independent timer 
can be used by pressing the timer button 
(5) and selecting any of the cursors of 
any cooking area. If, however, there are 
cooking areas switched on, to select the 
independent timer, you have to press the 
timer button (5) two times and then select 
any of the cursors.
If you do not select any button, the timer 
deactivates within 10 seconds.
-  The time setting (0-99 minutes) can be 

changed in increments of one minute by 
keeping your finger in the cursor (17).

- 

Holding down the button (16-17) 
dynamically increases the rate of change 
up to a maximum or minimum value, 
without beeps.

-  If the key (16-17) is released, the rate of