Fulgor Milano CPH 402 G TC X - Инструкция по эксплуатации - Страница 22

22

23

GB

Gas connection (Fig. 8)

The connection to a gas tank or gas line must be made 
by a qualified person in conformity to current updated 
UNI-CIG 7129 and 7131 standards after making 
sure that the cook top is prepared for the type of gas 
available. If not, see: “Adapting to different types of gas”. 
Also check that the feed pressure falls within the values 
shown in the table: “User characteristics”. 

Fig. 8

Metal rigid/semi-rigid hook-ups

Make the hook-up with metal fittings and pipes (even 
flexible hoses) so as not to stress the components inside 
the cook top.
Note: - After installation, use soapy water to check the 
perfect seal of the entire connection system. 
Important note: make the connection using only metal 
fittings and pipes (flexible, continuous-wall steel hoses 
or rigid copper or steel tubing) and in such a way that its 
entire length can be inspected.

Electrical connection (Fig. 9)

The installer must be qualified and is responsible for 
correct electrical connections and following safety 
standards.
Prior to carrying out the electrical connection, please 
ensure that:
•  the plant characteristics are such as to follow what is 

indicated on the matrix plate placed at the bottom of 
the working area;

•  that the plant is fitted with an efficient earth connection, 

following the standards and law provisions in force.

The earth connectionis compulsory in terms of the 
law.

Should there be no cable and/or plug on the equipment, 
use suitable absorption material for the working 
temperature as well, as indicated on the matrix 
plate. Under no circumstance must the cable reach a 
temperature above 50°C of the ambient temperature.
If connecting directly to the mains power supply, fit a 
multi-pole switch of a suitable size for the rated capacity 
with a clearance distance which completely disconnects 
the power line under overvoltage category III conditions, 
consistently with the rules of installation (the yellow/
green earth wir must not be interrupted). The plug or 
omnipolar switch must be easily reached on the installed 
equipment.

Fig. 9