Schaub Lorenz SLK MY6SC1 - Инструкция по эксплуатации - Страница 46

Residual Heat Functions

After all cooking processes there is some heat stored in the vitroceramic

glass called residual heat. The control can calculate roughly how hot the

glass is in the worst case. If the calculated temperature is higher than + 60

° C, then this will be indicated in the corresponding heater display after the

heater or the hob control was turned off. The residual heat display is shown

as long as the calculated heater temperature is > + 60 ° C.

The display of the residual heat has the lowest priority and is overwritten

by every other display value, during safety turn offs and displaying an error

code.

After reapplying the supply voltage to the hob control after an interruption

of the supply voltage occurred, causes that the residual heat display flashes,

if the corresponding heater had a residual heat of greater + 60 ° C before

the power interruption occurred. The display will flash until the max. residual

heat time has expired or the heater will be selected and activated.