Schaub Lorenz SLK MY6SC1 - Инструкция по эксплуатации - Страница 37

Варочная панель Schaub Lorenz SLK MY6SC1 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 48
Загружаем инструкцию
background image

Turn on dual and triple zones (available only in some models)

Turn on the dual zone
The activation of the dual zone is done after selecting the desired heater

by actuating     . This is confirmed by a buzzer signal. At the same time, the

corresponding 

Dual Zone Indicator

 goes on statically. Touching      for a

second time, the status of the dual zone toggles: it changes from dual zone

on to dual zone off and back again.

The extension zone can be activated only, after a level between 1-9 is set

on the basic zone of the heater.

Turn on triple zones
A dual or triple zone can only be switched on, if the basic zone of a heater

is set to level 1–9 and the heater is selected, the dot is on.

If 

     

is pressed, the buzzer signal sounds and the 

Dual Zone Indicator

 is

statically on. If      is pressed once again, there is another acoustical signal

and the triple heater is switched on. The 

Triple Zone Indicator

 will be

illuminated and the triple zone will be energized.

After touching 

    

once again, the triple zone of the heater will be switched

off again. Each operation causes a status change of the dual/triple zones

following in this manner (Dual zone on, triple zone on, all extended zones

off, dual zone on, triple zone on, dual zone on, etc. ...)

Set Cooking Level With and Without Heat Boost

All heaters are equipped with heat boost functionality.

If the heat boost is active, than the heater will be operated with maximum

power for the period of the heat boost time, that is dependent from the

selected heat setting. This is indicated through a flashing ´A`, alternating

with the heat setting value (e.g. 0,5 sec ´A` and 0,5 sec ´9`) in the heater

display. Once the heat boost time ended only the heat setting will be indicated.

If the heat boost should be used for a heater, 

touch or slide heat level 0, than

touch heat level 9 again

. After setting the heat to level 9 , ´A` will be indicated

alternating. This means that level 9 and heat boost is active now.

Содержание

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Schaub Lorenz SLK MY6SC1?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"