Schaub Lorenz SLK MY6SC1 - Инструкция по эксплуатации - Страница 30

4

- For hobs incorporating a lid, any spillage should

be removed from the lid before opening. And also

the hob surface should be allowed to cool before

closing the lid.

- The appliance is not intended to be operated by

means of an external timer or separate remote-

control system.

- Do not use harsh abrasive cleaners or sharp

metal scrapers to clean the oven door glass and

other surface since they can scratch the surface,

which may result in shattering of the glass or

damage to the surface.

- Do not use steam cleaners for cleaning the

appliance.

- Your appliance is produced in accordance with  all applicable local and international standards and

regulations.

- Maintenance and repair work must be made only by authorized service technicians. Installation and

repair work that is carried out by unauthorized technicians may endanger you. It is dangerous to alter

or modify the specifications of the appliance in any way.

- Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure

or electricity voltage and frequency) and the requirements of the appliance are compatible. The

requirements for this appliance are stated on the label.

- CAUTION: This appliance is designed only for cooking food and is intended for indoor domestic

household use only and should not be used for any other purpose or in any other application, such as

for non-domestic use or in a commercial environment or room heating.

- All possible security measures have been taken to ensure your safety. Since the glass may break, you

should be careful while cleaning to avoid scratching. Avoid hitting or knocking on the glass with accessories.

- Ensure that the supply cord is not wedged during the installation. If the supply cord is damaged, it must

be replaced by the manufacturer, its service agent or similarly qualified persons in order to prevent a

hazard.

Installation Warnings

- Do not operate the appliance before it is fully installed.

- The appliance must be installed by an authorized technician and put into use. The producer is not

responsible for any damage that might be caused by defective placement and installation by unauthorized

people.

- When you unpack the appliance, make sure that it is not damaged during transportation. In case of

any defect; do not use the appliance and contact a qualified service agent immediately. As the materials

used for packaging (nylon, staplers, styrofoam...etc) may cause harmful effects to children, they should

be collected and removed immediately.

- Protect your appliance against atmospheric effects. Do not expose it to effects such as sun, rain, snow

etc.

- The surrounding materials of the appliance (cabinet) must be able to withstand a temperature of min

100°C.