Schaub Lorenz SLK MY6SC1 - Инструкция по эксплуатации - Страница 41

10 sec after the last operation, the timer display changes to the timer that

will run out next.

The assignment of that timer is displayed always by a flashing 

Cooking

Zone Indicator

. How many timer are running you can identify by the number

of 

Cooking Zone Indicator

 that are statically on.

By toggling     

,

 you can display the timer values for the heater timer and

the minute minder. The assignment is always indicated by the flashing

Cooking Zone Indicator

. If no 

Cooking Zone Indicator

 flashes, the minute

minder time is shown in the 2-digit 

Timer Display

.

All heater timers can be erased by switching off the appliance into the 

S-

Mode

 using     . A minute minder will not be erased, it will proceed operation

until run out.

To erase a timer in 

Operation Mode

, you first have to select the timer by

toggling the 

Active/Deactive Timer Button

 until it is displayed. The value

can be erased then in 2 different ways:

·

  Decrement by sliding                       until ´00` appears on the 

Timer

Display.

After reaching the ´00` of a heater timer, the assigned heater level will be

set to ´0`.

The heater timer or minute minder run out is indicated acoustically by a

buzzer tone. This will be erased by touching any button for acknowledgement.

Key Lock

Key lock functionality is for blocking and set the appliance into a save

modus during operation. Touch modifications as for example rise heat

settings and others should not be possible. It is only possible to switch the

appliance off.

The lock function is active, if the 

Key Lock 

button      is pressed at least 2

sec. This operation is acknowledged by a buzzer. After successful operation

of more than 2 sec, the 

Key Lock Indicator

 flashes and the heater is locked.

The heater can only be locked in 

Operating Mode

 (

B-Mode

).