Gorenje GTW6INI - Инструкция по эксплуатации - Страница 11

11 

Printed surfaces 

The printing can be damaged if soiling (e.g. food or fluids that contained salt, olive oil) is 
not removed immediately. 
Remove any soiling immediately. 
Do not use any stainless steel cleaner on printed surfaces. This would rub off the print. 

Pan support and control 
knob

Do not clean the pan support in a dishwasher. 

Remove the pan support. Clean the pan support and the control knob with a solution of 
warm water and a little washing-up liquid applied with a soft sponge. Stubborn 
soiling should be soaked first. After cleaning, dry all surfaces with a clean cloth. 

Burners

Do not clean any parts of the burner in a dishwasher. 

The burner should be dismantled and then cleaned by hand using a solution of warm 
water and a little washing-up liquid applied with a soft sponge. 
Parts of the burner that cannot be removed should be wiped clean with a damp cloth 
only. 
The ignition candle and the

candle flame failure device should be very carefully wiped 

clean using a well wrung out cloth.

Do not let the ignitor get wet. If it gets wet, it will not spark. 
After cleaning, dry all surfaces with a clean cloth. 
Make sure that the flame slits are clean and completely dry. 
The surface of the burner crown cover will become more matt with time. This is quite 
normal and will not affect the operation of the cooktop. 

Ceramic glass surface 

After each use of the glass-ceramic hob, wait for it to cool down and clean it; otherwise, 
even the smallest food residue will be burnt onto the hot surface next time you use the 
appliance. 
For regular cleaning and maintenance of the glass-ceramic surface, use special 
conditioning agents which form a protective layer on the surface, shielding it from dirt. 
Before each use, wipe any dust or other particles from the hob surface and 
pan bottom as these could scratch the surface (Figure 1). 
 

Careful:

 steel wool, abrasive sponges, and abrasive detergents can scratch the hob 

surface. Glass ceramic surface can also be damaged by aggressive sprays and 
inappropriate or insufficiently shaken (mixed) liquid cleaning agents (Figure 1 and Figure 
2). 
 
Signs and indications on the hob may be worn if aggressive cleaning aids are used on 
cooking zone edges, or if pans with damaged bottom or used. 
Light stains can be removed by a damp soft cloth; then, wipe the surface dry (Figure 3). 
Water stains can be removed using a mild solution of vinegar however, do not use this 
solution to clean the frame (only with some models, as it may become dull. Do not use 
aggressive sprays or decalcification agents (Figure 3). 
Heavier stains can be removed using special agents and utensils for cleaning the glass-
ceramic hobs. When using these products, follow the instructions provided by their 
respective manufacturers. 
Make sure any residues of cleaning agents are thoroughly removed, as they could 
damage the glass-ceramic hob when the cooking zones heat up (Figure 3). 
Stubborn and burnt residues can be removed using a scraper. 
make sure the plastic part of the scraper does not come into contact with a hot cooking 
zone. Be careful not to cut yourself with the scraper! 
Sugar and sugar-laden food may permanently damage the glassceramic surface (Figure 
5); therefore, they should be removed from the glass-ceramic surface as soon as 
possible, although the cooking zone may still be hot (Figure 4). Any change in the color 
of the glass-ceramic surface does not affect its operation 
or the stability of the surface. Such discolorations are mostly a result of burnt food 
residues or use of cookware made of materials such as aluminum or copper; these stains 
are difficult to remove. 
 

Warning: 

All damage described above predominantly relates to the aesthetics, i.e. 

appearance of the appliance and do not affect its functionality directly. Such errors 
cannot be the subject of a warranty claim. 
 
 
 

Fig.1 

Fig.2 

Fig.3 

Fig.4 

Fig.5