Варочная панель Elica NikolaTesla Prime BL/F/83 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
64
USING THE EXTRACTOR FAN
Switch-on
Press (touch) briefly
ON/OFF (1)
hob/extractor: the symbol
lights up;
continuing to press
, all the available functions will become
visible for a few moments, e
, after which
only the main
ones will remain active; the others can be used, and will
be activated, subsequently, during use of the device.
IMPORTANT:
all the available functions will be illuminated with light
intensity, which will become more intense only when they
are activated.
Press
again to turn off
Note: This function has priority over the others.
Starting the extractor:
Touch (press) the
Selection zone (12)
to activate the
extractor
Extraction speed (power):
The extractor is equipped with 3 levels of extraction speed
(power)
Touch and slide your fingers along the
Selection bar (3):
to the right to increase the level of power;
to the left to decrease the level of power.
The power level set will be displayed in the
Selection/Display area (12)
Power Booster
The product has 2 additional power levels (above level 3)
•
Power Booster 1
: timed for 15 min.
•
Power Booster 2
: timed for 5 min.
after which the power returns to the previously set level.
Touch and slide with the fingers along the
Selection bar (12)
(over level 3) and activate the Power Booster 1
The Power Booster level 1 is indicated in the Selection /
Display area (12)
with the number "4" flashing
Touch and slide with the fingers along the
Selection bar (12)
(over level 3) and activate the Power Booster 2
The Power Booster level 2 is indicated in the Selection /
Display area (12)
with the symbol” ” flashing
Automatic operation
The hood will turn on at the most suitable speed, adapting the
extraction capacity to the maximum cooking level used in the
cooking zone.
When the cooking zones are switched off, the hood adapts its
extraction speed, decreasing it gradually, to eliminate residual
vapours and odours.
To activate this function:
Press
(14)
Repeat the operation to deactivate
.
Note:
if during automatic operation are selected from the
Selection bar (3)
the
speeds from 1 to 3
, the automatic
operation is interrupted;
if, instead, the
Power Boosters
are selected, automatic
operation will resume at the end of the timing, while in the
meantime the symbol “
” remains flashing.
Filter saturation indicator
The hood indicates when filter maintenance is needed:
Carbon/ceramic odour filters
“
”(
13)
comes on
Grease filter
“
”(
13
) flashes
Note: this function is disabled by default (see how to
enable it in the paragraph "Activation filter saturation
indicator")
Reset filter saturation
After performing maintenance on the filters (greases and/or
carbon/ceramic), press and hold “
”
(13)
;
“
”
(13)
turns off, restarting the indicator count.
