Philips GC8220/02 - Инструкция по эксплуатации - Страница 17

Problem

Cause

Solution

The iron does not 

produce enough 

steam/the amount 

of steam decreases 

and increases during 

steam ironing.

When the appliance pumps water into 

the steam generator, the steam amount 

sometimes decreases. This is probably 

when you think that the iron does not 

produce enough steam. However, this is 

a normal phenomenon and the steam 

output normalises within a few seconds.

To optimise the steam output, 

release the steam lock when you do 

not need steam and when you put 

down the iron.

Wet spots appear 

on the fabric during 

ironing.

The wet spots that appear on the fabric 

after you have steam ironed for some 

time may be caused by steam that has 

condensed onto the ironing board. Iron 

the wet spots without steam for some 

time to dr y them. If the underside of the 

ironing board is wet, wipe it with a piece 

of dr y cloth.

To prevent steam from condensing 

onto the ironing board, use an 

ironing board with a wire mesh top.

GC8325/GC8320/

GC8261/GC8260/

GC8225/GC8220 

only: Water droplets 

come out of the 

soleplate when I use 

the shot-of-steam 

function.

Steam may have condensed in the hose, 

the temperature may have been set 

below 

3

 or the appliance may not be 

ready for steam ironing.

Make sure the temperature is set to 

3

 or higher. Steam iron for a few 

seconds before you use the shot-of-

steam function.

EnGliSh

17