Stiga SBC 500 AE 278200008/ST1 - Инструкция по эксплуатации - Страница 182

EN - 19

PROBLEM

PROBABLE CAUSE

SOLUTION

13.  The battery charger 

is not recharging 

the battery

Battery is not correctly inserted 

in the battery charger

Check it is correctly inserted (par. 7.2.2)

Unsuitable environmental conditions

Recharge the battery in places with 

suitable temperatures (see battery/

battery charger instruction manual)

Dirty contacts

Clean the contacts

The battery charger is not energised

Check it is plugged in and the 

power socket is energised

Faulty battery charger

Replace with an original spare part

-

If the problem persists, refer to the 

battery/battery charger manual

14.  The LED indicator 

(Fig. 7.G) remains 

ON in steady mode

Self-check failed

Do not use the machine. Immediately 

turn off the machine, 

remove the battery 

and 

contact a service centre.

15.  The LED indicator 

(Fig. 7.G) remains ON 

in flashing mode

Battery communication error

Do not use the machine. Immediately 

turn off the machine, 

remove the battery 

and 

contact a service centre.

Rotor blocked

Do not use the machine. Immediately 

turn off the machine, 

remove the battery 

and 

contact a service centre.

Current overload

Optimize machine usage.

PCB overheated

Do not use the machine. Immediately 

turn off the machine, 

remove the battery 

and 

contact a service centre.

If problems persist after having performed the operations described above, contact your dealer.

15. ACCESSORIES ON REQUEST

 15.1 BATTERIES

Different capacity batteries are available

 to 

suit specific operating requirements (Fig. 27). 

The list of approved batteries for this machine 

is found in the "Technical Data" table.

 15.2 BATTERY CHARGER

Device used to recharge the battery

: fast 

(Fig. 27.A), standard (Fig. 27.B).