Ryobi RBC31SBO 5133002541 - Инструкция по эксплуатации - Страница 3

1

English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR

Safety, performance, and dependability have been given 
top priority in the design of your brushcutter/grass trimmer.

INTENDED USE

The brushcutter/grass trimmer is intended to be used only 
by adults who have read and understood the instructions 
and warnings in this manual and can be considered 
responsible for their actions. The product is only intended 
for use outdoors in a well ventilated area. For safety 
reasons, the product must be adequately controlled by 
using two-handed operation.
The product 

fi

 tted with the grass trimmer head (and 

appropriate guard) is intended for cutting long grass, pulpy 
weed, and similar vegetation at or about ground level. 
When 

fi

 tted with the Tri-Arc™ blade (and appropriate 

guard), it can also cut bushes. The product is not designed 
to be 

fi

 tted with a saw blade.

The cutting plane should be approximately parallel to the 
ground surface. The product should not be used to cut or 
trim hedges, bushes, or other vegetation where the cutting 
plane is not parallel to the ground surface.
Do not use the product for any other purpose.

 WARNING

To reduce the risk of injury, the user must read and 
understand the operator’s manual.

 WARNING

Do not attempt to operate the product until you 
have read thoroughly and understood completely all 
instructions and safety rules contained in this manual. 
Failure to comply may result in accidents involving fire, 
electric shock, or serious personal injury. Save the 
operator’s manual and review frequently for continuing 
safe operation, and instructing others who may use the 
product.

 WARNING

The product is not intended to be used by children or 
persons with reduced physical, mental, or sensory 
capabilities. Children should be adequately supervised 
to ensure they do not play with the product.

GENERAL SAFETY WARNINGS

■

For safe operation, read and understand all instructions 
before using the product. Follow all safety instructions.
Failure to follow all safety instructions listed below, can
result in serious personal injury.

■

Some regions have regulations that restrict the use of
the product. Check with your local authority for advice.

■

Do not allow children or untrained individuals to use the 
product.

■

Never start or run the engine in a closed or poorly
ventilated area; breathing exhaust fumes can kill.

■

Clear the work area before each use. Remove all
objects such as rocks, broken glass, nails, wire, or
string, which can be thrown or become entangled in the 

string head or blade.

■

Wear full eye and hearing protection while using the
product. If working in an area where there is a risk of
falling objects, head protection must be worn.

■

Hearing protection may restrict the operator’s ability
to hear warning sounds. Pay particular attention to
potential hazards around and inside the working area.

■

Wear heavy long trousers, non-slip protective footwear
and gloves. Do not wear loose fitting clothing, short
trousers, jewellery of any kind, or use with bare feet.

■

Secure long hair so it is above shoulder level to prevent 
entanglement in any moving parts.

■

Keep all bystanders, children, and pets at least 15 m
away. Stop the product if anyone enters the area.

■

Do not use the product when you are tired, ill, or under
the influence of alcohol, drugs, or medication.

■

Do not use in poor lighting. The operator needs clear
unrestricted vision to identify potential hazards.

■

Keep firm footing and balance at all times. Do not
overreach. Overreaching can result in loss of balance
or exposure to hot surfaces.

■

Keep all parts of your body away from any moving part.

■

Do not touch area around the silencer or cylinder of the 
product, these parts get hot from operation.

■

Always stop the engine and allow it to cool down before 
making any adjustments.

■

Do not smoke when mixing fuel or filling fuel tank.

■

Mix and store fuel in a container approved for fuel.

■

Mix fuel outdoors where there are no sparks or flames.
Wipe up any fuel spillage. Move 9 m away from
refueling site before starting engine.

■

Stop the engine and allow to cool down before refueling 
or storing the product.

■

Allow the engine to cool down; empty the fuel tank and
secure the product from moving before transporting in
a vehicle.

■

Always stop the engine and make sure all moving parts 
have come to stop before:

●

servicing

●

leaving the product unattended

●

cleaning your product

●

changing accessories

●

clearing blockages

●

checking for any damage after hitting an object

●

checking for any damage if the product starts to
vibrate abnormally

●

performing maintenance

●

removing blade

●

installing blade

 WARNING

Never use cutting means or attachments, which are not 
specified by Ryobi in this manual. This includes the use 
of metal multi-piece pivoting chains and flail-blades. 
These items are known to break up during use and 
present a high risk of serious injury to the operator or 
bystanders.