LINKSYS RE6500 - Инструкция по эксплуатации - Страница 6

5

Linksys AC1200 Max Wi-Fi Range Extender

NOTE

If you have a dual-band router and wish to connect to both bands, you will 
have to perform the WPS setup twice. The first connection will be on the 2.4 
GHz band.

Connecting with the range extender’s PIN

The Wi-Fi Protected Setup PIN (Personal Identification Number) can be found 
on the product label on the bottom of the extender. You can use this method 
only if your router’s administration utility has a Wi-Fi Protected Setup menu.

1.  Enter the extender’s PIN into the appropriate field on the router’s Wi- Fi 

Protected Setup screen. Click Register. When the connection is complete, 
the Wi-Fi Protected Setup light on the extender will be solid.

2.  Click OK.

Connecting devices to your network through the 
extender

Choose from the methods below to connect devices that support Wi-Fi 
Protected Setup to your network.

NOTE

Repeat the instructions for each client device that supports Wi-Fi Protected 
Setup.

Connecting with the Wi-Fi Protected Setup Button

Use this method if your client device has a Wi-Fi Protected Setup button.

1.  Press the Wi-Fi Protected Setup button on the client device.

2.  Click the Wi-Fi Protected Setup button on the extender’s Wi-Fi Protected 

Setup screen, OR press and hold the Wi-Fi Protected Setup button on 
the top panel of the extender for one second. When the connection is 
complete, the Wi-Fi Protected Setup light on the extender will be solid.

3.  If using the extender’s Wi-Fi Protected Setup screen, be sure to click OK 

within two minutes or you will have to start over.

Connecting with the client device’s PIN

Use this method if your client device has a Wi-Fi Protected Setup PIN (Personal 
Identification Number).

1.  Enter the PIN from the client device in the field on the extender’s Wi-Fi 

Protected Setup screen.

2.  Click Register on the extender’s Wi-Fi Protected Setup screen. When the 

connection is complete, the Wi-Fi Protected Setup light on the extender 
will be solid.

3.  Click OK on the extender’s Wi-Fi Protected Setup screen within two minutes 

or you will have to start over.