LINKSYS RE6500 - Инструкция по эксплуатации - Страница 5

4

Linksys AC1200 Max Wi-Fi Range Extender

Using Wi-Fi Protected Setup

Wi-Fi Protected Setup™ makes it easy to connect your extender to your network, 
and connect other devices to your network through the extender.

Wi-Fi Protected Setup light activity

WPS Light

Status/ description

Blinking white

When WPS connection is in process

Solid white

When WPS connection is successful

Blinking amber for two minutes

When WPS cannot establish connection 
or encounters a problem

Fix: wait a few seconds after LED stops 
blinking and try again

Connecting the extender to an existing access point

If your access point or router supports it, you can use Wi-Fi Protected Setup 
to connect the range extender to the access point or router. Choose from the 
setup methods below to connect the extender.

NOTE

If you have an access point or a router that does not support Wi-Fi Protected 
Setup, note the wireless settings, and then manually configure the extender.

Connecting with the Wi-Fi Protected Setup Button

Use this method if your router or access point has a Wi-Fi Protected Setup button.

1.  Press the Wi-Fi Protected Setup button on the extender.

2.  Click the Wi-Fi Protected Setup button on the router’s Wi-Fi Protected 

Setup screen (if available), OR press and hold the Wi-Fi Protected Setup 
button on the router for one second. When the connection is complete, 
the Wi-Fi Protected Setup light on the extender will be solid.

3.  If you used the extender’s Wi-Fi Protected Setup screen, click OK in that 

screen within two minutes.