Toshiba 32WA2063DG - Инструкция по эксплуатации - Страница 17

English

   - 16 -

cancel the scan. The channels that have already been 

found will be stored in the channel list.

Update Scan:

 Search for updates. Previously added 

channels will not be deleted, but any newly found 

channels will be stored in the channel list.

Analogue Manual Scan: 

Start a manual scan for 

analogue channels. Enter the 

Start Frequency

 and 

then select 

Scan Up

 or 

Scan Down

. When a channel 

is found the scan will be completed and the found 

channel will be stored in the channel list.

Single RF Scan: 

Select the 

RF Channel

 by using 

the Right/Left directional buttons. 

Signal Level

 and 

Signal Quality

 of the selected channel will be shown. 

Press 

OK

 to start scan on the selected RF channel. 

The found channels will be stored in the channel list.

Manual Service Update:

 Start a service update 

manually.

LCN:

 Set your preference for LCN. LCN is the Logical 

Channel Number system that organizes available 

broadcasts in accordance with a recognizable channel 

number sequence (if available).

Channel Scan Type:

 Set your scan type preference. 

Channel Store Type: 

Set your store type preference. 

Favourite Network Select:

 Select your favourite 

network. This menu option will be active, if more than 

only one network is available.

Channel Skip:

 Set channels to be skipped when 

switching the channels via 

Programme +/-

 buttons 

on the remote. Highlight the desired channel/s on the 

list and press 

OK

 to select/unselect.

Channel Sort:

 Replace the positions of the two 

selected channels in the channel list. Highlight the 

desired channels on the list and press 

OK

 to select. 

When the second channel is selected, the position of 

this channel will be replaced with the position of the 

first selected channel.

Channel Move:

 Move a channel to the position of 

another channel. Highlight the channel you want to 

move and press 

OK

 to select. Then do the same for a 

second channel. When the second channel is selected, 

the first selected channel will be moved to the position 

of that channel.

Channel Edit:

 Edit channels in the channel list. Edit the 

name and channel number of the selected channel and 

display 

Network Name

, 

Frequency

, 

Color System

and 

Sound System 

information related to that channel 

if available. Depending on the channel other options 

may also be editable. You can press the 

Blue

 button 

to delete the highlighted channel.

Analogue Channel Fine-tune:

 Fine-tune an analogue 

channel. A list of available analogue channels will be 

displayed. Select the desired one from the list and 

press 

OK

 button. Then change the frequency of the 

channel by pressing Left/Right directional buttons. 

Press 

OK

 to store the new frequency for that channel. 

Press 

Back

 to cancel. This item may not be visible, 

depending on whether or not the last watched channel 

was analogue.

Clear Channel List:

 Delete all channels stored in the 

channel list of the selected channel installation mode. 

A dialogue will be displayed for confirmation. Highlight 

OK

 and press 

OK

 button to proceed. Highlight 

Cancel

and press 

OK

 to cancel.

Channel Installation Mode - Cable

Automatic Channel Search:

 Start a scan for analogue 

and digital cable channels. If available, operator op-

tions will be listed. Select the desired one and press 

OK

. 

Scan Mode

, 

Channel Scan Type

, 

Frequency

and 

Network ID

 options may be available. The options 

may vary depending on the operator and the 

Scan 

Mode 

selections. Set the 

Scan Mode

 as 

Full

 if you 

don’t know how to set up other options. Highlight 

Scan

and press 

OK

 to start the scan. You can press the 

Back

button to cancel the scan. The channels that have 

already been found will be stored in the channel list.

Single RF Scan: 

Enter the 

Frequency 

value.

 Signal 

Level

 and 

Signal Quality

 of the selected 

Frequency

will be shown. Highlight

the 

Scan

 option and press 

OK

 to start scan. The found channels will be stored 

in the channel list.

LCN:

 Set your preference for LCN. LCN is the Logical 

Channel Number system that organizes available 

broadcasts in accordance with a recognizable channel 

number sequence (if available).

Channel Scan Type:

 Set your scan type preference. 

Channel Store Type: 

Set your store type preference. 

Favourite Network Select:

 Select your favourite 

network. This menu option will be active, if more than 

only one network is available.

Channel Skip:

 Set channels to be skipped when 

switching the channels via 

Programme +/-

 buttons 

on the remote. Highlight the desired channel/s on the 

list and press 

OK

 to select/unselect.

Channel Sort:

 Replace the positions of the two 

selected channels in the channel list. Highlight the 

desired channels on the list and press 

OK

 to select. 

When the second channel is selected, the position of 

this channel will be replaced with the position of the 

first selected channel.

Channel Move:

 Move a channel to the position of 

another channel. Highlight the channel you want to 

move and press 

OK

 to select. Then do the same for a 

second channel. When the second channel is selected, 

the first selected channel will be moved to the position 

of that channel.

Channel Edit:

 Edit channels in the channel list. Edit 

the name and channel number of the selected channel 

and display 

Network Name

, 

Frequency

, 

Color Sys-