TCL LED28D2900S - Инструкция по эксплуатации - Страница 9

General

Operation

First Time Setup

 involves selecting all the settings 

required to be able to search for and store all the 
channels you can receive. Make sure that the television 
is switched on and follow all the steps in turn specified 
hereafter. 

The first time you switch the set on, the 

First Time Setup

wizard opens, which guides you through the initial setup 
process. 

     Press the up or down direction button to select 

Auto 

     Scan

 and press the 

OK

 or right direction button to 

     start the search automatically. All available TV 
     programmes are stored. This operation takes a few 
     minutes. The display shows the progress of the search 
     and the number of programs found.  
     
    

Note:

 to prevent the channel setup process from being 

    interrupted, wait for the message indicating that the 
    setup is completed. 

    In this step, you can also select 

Exit

 to skip the 

    channel search progress. But when you turn the TV on 
    next time, the prompt on the screen will remind you to 
    do the channel scan first.

Note: 

the 

Store 

mode does not satisfy the MEPS 

    certification, suggest selecting 

Home

.

First Time Setup

2. Press the left or right direction buttons to select the 
    desired item, then press the 

OK

 button to open the 

    corresponding submenu.  

3. In submenus, use the up or down direction button to 
    select menu options, use the left or right direction button 
    to set functions or change values. Use the 

OK

 button 

    to activate a setting. Use the 

OK

 or right direction button 

    to open the corresponding submenu. 

4. Press 

Menu

 to return to the previous menu or press 

Exit

 to close the menu.   

Using

Menu

System

This section explores the menus of your TV. Each menu 
is outlined and detailed to help you get the most from 
your TV. 

8

To access the menu system: 

1. Press the 

Menu

 button to display the main menu.

1.
   select 

Channel>Tuner Type(Satellite, Antenna, Cable)

, 

   then press the left

or right direction button to select the 

   tuner type. 

2.Select 

Auto Scan, 

then press the 

OK 

or right

 direction button to enter.

   
3. Select 

DTV & ATV 

(or

 DTV

 or 

ATV

), 

    then press the up/down 

direction button to highlight the 

Start, 

press the 

OK 

or right direction button

 to 

start the 

    automatic search process. 
    The search may take a few minutes. During the 
    process, you can press 

Menu 

or

 Exit

 to abort halfway.  

Press the 

Menu 

button to display the main menu, and

Auto Scan

This option allows the TV to search for, find and store all 
the available analog and digital channels. 
Follow all the steps in turn specified hereafter.  

This

allows

you

to

update

all

available

channels

, 

without

altering

the

sorting

of existing

channels

.

 (only available in 

DTV mode)
1. Display the 

Channel

 menu, press the up or 

    down direction button to highlight 

Auto Channel 

    Update 

option. 

2. Press the left or right direction button to select 

On/Off

    to update the channel.

Automatic

Update

First Time Setup

Auto Scan

H u e