Телевизоры TCL LED28D2900S - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
General
Operation
Analog
Manual
Scan
1.
direction button to highlight
manual scan
, press the
OK
or right direction button to enter. Then press the
up or down direction button to highlight
Analog
Manual
scan.
Press the
OK
or right direction button
to enter.
2. Press the up/down/left/right direction and number
button to set, then press the up or down direction
button to highlight Start. Press the
OK
or right
direction button to search.
3. Press
Menu
to return to the previous menu or press
Exit
to close the menu.
Display the
Channel
menu, press the up or down
Antenna
Manual
Installation
Allows you to start manual searching the available
channels from the current frequency or any frequency
you input.(Only for digital channels)
1. Display the
Channel
menu, press the up or down
direction button to highlight
Manual Scan
, press the
OK
or right direction button to enter. Press the up or
down direction button to highlight
Digital
Manual
Scan
, press the
OK
or right direction button to enter.
2. Press the left or right direction button to select the
frequency or use the digit key to input a channel,
then highlight
Start
, press OK or right direction
button to search.
3. When the search is completed, press
Menu
to return.
9
Satellite Manual Installation
3. Press the up or down direction button to highlight the
trasponder, press
OK
to select it. Then press the blue
button and press
OK
to search.
4. Allows you to add/edit/delete or a transponder below the
note on the OSD.
1. Display the
Channel
menu, press the up or down
direction button to highlight
Tuner Type
, press the
left or right direction button to select
Satellite
.
2. Press the up or down direction button to highlight
Satellite System
, press the OK or right direction
button to enter. First select a satellite, then press
the right direction button to enter.
Common interface
: press the right direction button
to select
CI card.
Signal Information on DTV channels
1. Select
Channel > Signal Information
.
2. Press the
OK
or right direction button to display some
signal information on current digital channel, such as
signal strength, Freq.(MHz), etc..
Cable Manual Installation
1. Display the
Channel
menu, press the up or down
direction button to highlight
Tuner Type
, press the
left or right direction button to select
Cable
.
2. Press the up or down direction button to highlight
Manual
Scan
, press the
OK
or right direction button to enter. Press
the up or down direction button to highlight
Digital
Manual
Scan
, press the
OK
or right direction button to enter.
3. Use the digit key to input a frequency, then highlight
Start
,
press OK or right direction button to search. When the
search is completed, press
Menu
to return.
After the automatic search, channels are arranged in a
preset order. You can skip channels, modify the preset
order and delete channels.
Skip
channels
: if a channel was stored twice or
its reception is poor, you can simply skip it. The
skipped channels can not be selected by pressing the
PROGRAM UP /DOWN
button.
Display the
Channel
menu, press the up or down
direction button to highlight
Channel Edit.
press the OK or right direction button to enter.
Press
the
up
or
down
direction
button
to
select
a
channel
and
press
the
green
button
to
skip.
Delete Channels
: Press the up or down direction
button to highlight a channel, then press red button
to delete.
Channel Edit
F r e q u e n c y
S t r e n g t h
5 1 4 . 0 0 M H z
0
