Bresser National Geographic 70 350 GoTo - Инструкция по эксплуатации - Страница 10

10

General Information

About this Instruction Manual

Please read the safety instructions in this manual carefully. To avoid damage 
to the unit and the risk of injury, only use this product as described in the 
manual.
Keep the instruction manual handy so that you can easily look up information 
on all the functions.

CAREFUL

You will find this symbol before every section of text that 
deals with the risk of minor to severe injuries resulting from 
improper use.

ATTENTION

You will find this symbol in front of every section of text 
which deals with the risk of damage to property or the 
environment.

Intended Use

This product is intended only for private use. 
It was developed for the magnified display of things in nature.

General Warning

RISK OF BLINDNESS

Never use this device to look directly at the sun or in the direct prox-
imity of the sun. Doing so may result in a risk of blindness.

CHOKING HAZARD

Children should only use the device under adult supervision. Keep 
packaging material, like plastic bags and rubber bands, out of the 
reach of children, as they pose a choking hazard.

FIRE RISK

Do not place the device, particularly the lenses, in direct sunlight. 
The concentration of light could cause a fire.

RISK OF ELECTRIC SHOCK

This device contains electronic components which operate via a 
power source (power supply and/or batteries). Children should 
only use the device under adult supervision. Only use the device as 
described in the manual; otherwise, you run the risk of an electric 
shock.

RISK OF CHEMICAL BURN

Keep batteries out of the reach of children! Make sure you insert the 
batteries correctly.  Empty or damaged batteries could cause burns 
if they come into contact with the skin. If necessary, wear adequate 
gloves for protection.

RISK OF FIRE/EXPLOSION

Do not expose the device to high temperatures. Use only the rec-
ommended batteries. Do not short-circuit the device or batteries, or 
throw them into a fire. Excessive heat or improper handling could 
trigger a short-circuit, a fire or an explosion.

ATTENTION

Do not disassemble the device. In the event of a defect, please 
contact your dealer. The dealer will contact the Service Centre and 
can send the device in to be repaired, if necessary. 

Privacy Protection

This device is intended only for private use. Please heed 
the privacy of other people. Do not use the device to look 
into apartments, for example.

 Accessories may vary depending on the model.

Parts overview (No. 1-8)

B

  Telescope tube

C

  Tube opening

D

  Eyepiece connection

E

  Focus wheel

F

  Handbox

G

  Eyepiece holder

H

  Handbox tray

I

  Azimuthal lock

J

  Tripod

1)

  LED viewfinder (only with Art.No. 90-62100)

1!

  Battery compartment

1@

  Locking screw

1#

  Accessory tray

1$

  Altitude locking knob

1%

  Dust cover

1^

  Eyepieces

1&

  Moon filter

1*

  Compass

1(

  Star map

2)

  Software CD

Handbox (No. 9)

B

  Red light source

C

  Handbox display

D

  Plus/minus key

E

  Illumination

F

  Arrow keys

G

  Centre key

H

  Number pad

I

  Mini-USB port

J

  RJ-45 port

1)

  RJ-22 port

Part I – Construction

1. General/Location

Before you begin assembly, choose a suitable location for your telescope. It 
is best to build the telescope in a place where you have a clear view of the 
skies, a stable footing and sufficient space around you.

Before beginning assembly, remove all the parts from the packaging, and, 
using the diagram, check to make sure no parts are missing.

2. Tripod

Take the tripod (9) out of the box. Carefully open the legs and place the 
tripod on a level surface place and lock the accessory tray (13) on the centre 
knob and rotate until it snaps in place (No. 3).

Note:

 Please do not forget to remove the accessory tray before collapsing 

the tripod.

3. Telescope

Loosen the screw in the dovetail mount so that it is completely retracted 
(No. 4). Place the telescope with the dovetail in the mount and tighten the 
screw. Make sure that the National Geographic logo is upright.

4. Altitude knob

Loosen the vertical knob by rotating it anticlockwise, align the optical tel-
escope tube (1) horizontally and retighten the knob (No. 5).

5. Mount

Place the mount base's mounting holes on the tripod's mounting screws and 
tighten them (No. 6).

6. Eyepiece

Remove one eyepiece from its eyepiece holder (6) and slide it into the 
eyepiece connection (3). Tighten the holding screws (No. 5). Start with the 
lowest magnification eyepiece, which has the highest focal length printed on 
it (e.g. 20 mm or 25 mm, depending on your model) to locate objects and 
find the correct focus. If you have the object you want to view centred in 
the field of view, switch to a higher magnification by using an eyepiece with