Makita VC003GLZ - Инструкция по эксплуатации - Страница 14

14 ENGLISH

Installing paper pack

Optional accessory

WARNING:

Before using a paper pack, 

make sure that the cloth filter or prefilter is used 

together.

 Failure to use the cloth filter / prefilter 

together may cause unusual noise and heat, resulting 

in a fire.

NOTICE:

Never pick up water or other liquids 

or wet dusts when using a paper pack.

 Picking up 

such things may cause the paper pack breakage.

NOTICE:

When using the cloth filter, make sure 

that the float and the float cage are attached on 

the head unit.

NOTICE:

When using the prefilter, make sure 

that the powder filter and the damper are used 

together.

1.

  Unfold a paper pack.

2.

  Align the paper pack opening with the dust intake 

of the tank.

3.

  Install the paper pack into the tank with its card

-

board opening hooked on the paper pack holder.

► 

Fig.15:

1.

 Paper pack 

2.

 Cardboard opening 

3.

 Paper pack holder 

4.

 Dust intake

Installing polyethylene bag

With a polyethylene bag installed in the tank, you can 

easily empty the tank without letting your hands dirty.

Lay a polyethylene bag over the tank, and slip one side 

of the top edge of the bag at its open end in between 

the holder plate and the front wall of the tank.

► 

Fig.16:

1.

 Holder plate 

2.

 Front wall of tank 

3.

 Polyethylene bag

Spread the other top edges of the bag outwards over 

the top rims of the tank. Place the cloth filter or prefilter 

over the polyethylene bag to fasten the opening of the 

bag securely.

► 

Fig.17:

1.

 Cloth filter / prefilter

NOTE:

 A polyethylene bag available on the 

market can be used. 0.04 mm or thicker one is 

recommended.

NOTE:

 Too much dust will tear the bag easily, so 

do not collect the dust more than the half of the bag 

capacity.

Emptying tank with 

polyethylene bag

WARNING:

Always make sure that the cleaner 

is switched off and the battery cartridges are 

removed before emptying the tank.

 Failure to do 

so may cause an electric shock and serious personal 

injury.

NOTICE:

Do not apply a great impact on the float 

cage and tank.

 Applying a great impact may cause 

deformation and damage to the parts.

NOTICE:

Empty the tank at least once a day 

although this depends on picked-up dust volume 

in the tank.

 Or, the suction force will weaken and the 

motor may be broken.

NOTICE:

Do not grab the hooks or latches when 

emptying the tank.

 Grabbing the hooks or latches 

may cause them to break.

Release the locking latches and lift the head unit up off 

the tank.

Shake off dust from the cloth filter or prefilter before 

lifting the filter away from the tank.

Then remove the polyethylene bag out of the tank, 

closing the opening of the bag by hand.

► 

Fig.18:

1.

 Polyethylene bag 

2.

 Tank

NOTE:

 Take the polyethylene bag out of the tank 

carefully to avoid it from being scratched and torn by 

the edges inside the tank.

NOTE:

 Empty the polyethylene bag before it 

becomes full. Too much dust in the tank may cause 

the polyethylene bag to be torn.

Installing multi hook

Use the multi hook to hold a hose, accessories and 

attachments not in use in place, and you can quickly 

take them out according to your preferences.

► 

Fig.19

Place the multi hook over the mounting base at the rear 

of the cleaner, setting the rails on the multi hook along 

the grooves on the mounting base.

► 

Fig.20:

1.

 Multi hook 

2.

 Mounting base

Installing MAKPAC adapter

Optional accessory

Connectable and stackable MAKPAC storage cases 

can be installed on top of the cleaner with an optional 

adapter. The cases are available in many sizes and 

styles to suit your preferences.
Place the mounting base hook over the handle of the 

cleaner with its mounting surface facing upwards when 

the handle is folded into the closed position.

► 

Fig.21:

1.

 Mounting base hook 

2.

 Mounting surface 

3.

 Handle

Mount the MAKPAC adapter onto the mounting base 

hook, and secure them together with four screws 

provided.

► 

Fig.22:

1.

 MAKPAC adapter 

2.

 Mounting base hook 

3.

 Screw

Lift the push bar up and tighten the knob to prepare 

installing the MAKPAC cases onto the cleaner.

► 

Fig.23:

1.

 Push bar 

2.

 Knob

NOTE:

 For details on installing the MAKPAC cases, 

refer to the instructions provided with the MAKPAC 

adapter and cases.