Bosch AdvancedVac 20 - Инструкция по эксплуатации - Страница 15

 English | 

15

Bosch Power Tools

1 609 92A 43W | (6.9.17)



Before restarting, check the proper condition of the 
vacuum hose. When doing this, leave the vacuum hose 
mounted to the vacuum cleaner to prevent dust from 
coming out. 

Otherwise, you could possibly inhale dust.



Do not clean the vacuum cleaner with a water jet point-
ed directly at it. 

The penetration of water into the vacuum 

cleaner lid increases the risk of an electric shock.



Do not leave the vacuum cleaner unattended while it is 
switched on.



Do not use the vacuum cleaner as a permanent dust ex-
traction device.

Products sold in GB only

: Your product is fitted with a 

BS 1363/A approved electric plug with internal fuse (ASTA 
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be 
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should 
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible 
shock hazard and should never be inserted into a mains sock-
et elsewhere.

Additional safety warnings
(AdvancedVac 20)

Use the socket only for the purposes 
specified in the operating instructions.

Symbols

The following symbols could have a meaning for the use of 
your vacuum cleaner. Please take note of the symbols and 
their meaning. The correct interpretation of the symbols will 
help you to use the vacuum cleaner in a better and safer man-
ner.

Product Description and Specifica-
tions

The vacuum cleaner is intended for vacuuming and extracting 
materials that are not harmful to one’s health and for vacuum-
ing non-flammable liquids. 

The vacuum cleaner is intended only for private use and not 
for professional use.

Use the vacuum cleaner only when you fully understand and 
can perform all functions without limitation, or have received 
appropriate instructions.

Product Features

The numbering of the product features refers to the illustra-
tion of the vacuum cleaner on the graphics page.

1

Container

2

Drain hole for liquids  (AdvancedVac 20)

3

Hose connection piece (vacuuming function)

4

Socket for power tool  (AdvancedVac 20)

5

Mode selector switch  (AdvancedVac 20)

5

On/Off switch  (UniversalVac 15)

6

Carrying handle

7

Vacuum lid

8

Latch of the vacuum cover

9

Castor

10

Castor brake

11

Vacuum-hose holder

12

Holder for crevice nozzle

13

Holder for floor nozzle

14

Holder for vacuum tubes

15

Bracket for curved nozzle/extraction adapter

16

Vacuum hose

17

Extraction adapter

18

Curved nozzle

19

Crevice nozzle 

20

Vacuum tube

21

Floor nozzle

22

Brush insert * (AdvancedVac 20)

23

Rubber lip * (AdvancedVac 20)

24

Rubber lip/brush insert * (UniversalVac 15)

25

Hose connection piece (blower function)

26

Exhaust air cover

27

Snap-fastener

28

Connection flange

29

Dust bag *

30

Release buttons for rubber lip/brush insert

31

Air diffuser

32

Fabric filter

33

Filter

34

Filter holder

35

Filter basket

36

Permanent filter

37

Cable holder

38

Retaining strap

* Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories 
can be found in our accessories program.

Symbols and their meaning

Automatic Start/Stop feature

Extraction of dust resulting from run-
ning power tools
The vacuum cleaner automatically 
switches on and off with a time delay

Switching Off

Vacuuming

Vacuuming of deposited dust

Specification of the allowable load of 
the connected power tool (country-
specific)

WARNING

max. 2000W

min. 100W

OBJ_BUCH-3012-003.book  Page 15  Wednesday, September 6, 2017  3:04 PM