D-Link DCS-4603 - Инструкция по эксплуатации - Страница 32

32

D-Link DCS-4603 User Manual

Section 3: Configuration

Image Setup

In this section, you may configure the video image settings for your camera. A preview of the image will be shown in Live Video.

Enable Privacy 

Mask:

Mirror:

Flip:

Anti Flicker:

White Balance:

Exposure 

Mode:

The Privacy Mask setting allows you to specify up to 3 rectangular areas 

on the camera's image to be blocked/excluded from recordings and 

snapshots.

You may click and drag the mouse cursor over the camera image to draw 

a mask area. Right clicking on the camera image brings up the following 

menu options:

•  Disable All:

 Disables all mask areas

•  Enable All:

 Enables all mask areas

•  Reset All:

 Clears all mask areas.

This will mirror the image horizontally.

This will flip the image vertically. When turning Flip on, you may want to 

consider turning Mirror on as well.

Select the frequency used by your power lines to avoid camera flicker 

or moving bars in your video. Generally, if your power outlets are 220 to  

240 V, you should select 

50 Hz

. If your power outlets are 100 to 120 V, you 

should select 

60 Hz

.

Use the drop-down box to change white balance settings to help balance 

colors for different environments. You can choose from Auto, Outdoor, 

Indoor, and Fluorescent.

Changes the exposure mode. Use the drop-down box to set the camera for 

Indoor, Outdoor, or Night environments, or to Moving to capture moving 

objects. The Low Noise option will focus on creating a high-quality picture 

without noise. You can also create 3 different custom exposure modes. The 

Max Gain setting will allow you to control the maximum amount of gain to 

apply to brighten the picture.