D-Link DCS-4603 - Инструкция по эксплуатации - Страница 28

28

D-Link DCS-4603 User Manual

Section 3: Configuration

Network Setup

Use this section to configure the network connections for your camera. All relevant information must be entered accurately. After making any 

changes, click the 

Save Settings 

button to save your changes.

LAN Settings:

DHCP:

Static IP Client:

Enable UPnP 

Presentation:

This section lets you configure settings for your local area network.

Select this connection if you have a DHCP server running on your network 

and would like your camera to obtain an IP address automatically.

If you choose DHCP, you do not need to fill out the IP address settings.

You may obtain a static or fixed IP address and other network information 

from your network administrator for your camera.

IPv4 Address: 

Enter the IP address that the camera will use on your 

network. You may need to get this information from your ISP or network 

administrator.

Subnet Mask:

 The default value is “255.255.255.0.” Used to determine if the 

destination is part of the same subnet.

Default Router:

 The router used to forward frames to destinations 

in a different subnet. Invalid router settings may cause the failure of 

transmissions to a different subnet.

Optional Primary DNS:

 Primary domain name server that translates names 

to IP addresses.

Optional Secondary DNS:

 Secondary domain name server to backup the 

Primary DNS.

Enabling this setting allows your camera to be configured as a UPnP device 

on your network.