Stanley SCD20S2K - Инструкция по эксплуатации - Страница 4

4

ENGLISH

(Original instructions)

Intended use

Your STANLEY drill/screwdriver SCD20 has been designed 

for screwdriving applications and for drilling in wood, metal 

and plastics. This tool is intended for semi-professional and 

professional use.

Safety instructions
General Power Tool Safety Warnings

@

WARNING! Read all safety warnings and 

instructions. Failure to follow the warnings 

and instructions may result in electric shock, 

fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FU-

TURE REFERENCE. 

The term "power tool" in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless) 

power tool.

1. Work area safety

a.  Keep work area clean and well lit. Cluttered or dark 

areas invite accidents.

b.  Do not operate power tools in explosive 

atmospheres, such as in the presence of flammable 

liquids, gases or dust. Power tools create sparks which 

may ignite the dust or fumes.

c.  Keep children and bystanders away while operating 

a power tool.  Distractions can cause you to lose 

control.

2.  Electrical safety

a.  Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any adapter 

plugs with earthed (grounded) power tools. 

Unmodified plugs and matching outlets will reduce risk of 

electric shock.

b.  Avoid body contact with earthed or grounded 

surfaces such as pipes, radiators, ranges and 

refrigerators. There is an increased risk of electric 

shock if your body is earthed or grounded.

c.  Do not expose power tools to rain or wet conditions. 

Water entering a power tool will increase the risk of 

electric shock.

d.  Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. Keep 

cord away from heat, oil, sharp edges or moving 

parts. Damaged or entangled cords increase the risk of 

electric shock.

e.  When operating a power tool outdoors, use an 

extension cord suitable for outdoor use. Use of a cord 

suitable for outdoor use reduces the risk of electric shock.

f.  If operating a power tool in a damp location is 

unavoidable, use a residual current device (RCD) 

protected supply. Use of an RCD reduces the risk of 

electric shock.

3.  Personal safety

a.  Stay alert, watch what you are doing and use common 

sense when operating a power tool. Do not use a 

power tool while you are tired or under the influence 

of drugs, alcohol or medication. A moment of inattention 

while operating power tools may result in serious personal 

injury.

b.  Use personal protective equipment. Always wear eye 

protection. Protective equipment such as dust mask, 

non-skid safety shoes, hard hat, or hearing protection 

used for appropriate conditions will reduce personal 

injuries.

c.  Prevent unintentional starting. Ensure the switch is in 

the off-position before connecting to power source 

and/or battery pack, picking up or carrying the tool. 

Carrying power tools with your finger on the switch or 

energising power tools that have the switch on invites 

accidents.

d.  Remove any adjusting key or wrench before turning 

the power tool on. A wrench or a key left attached to a 

rotating part of the power tool may result in personal injury.

e.  Do not overreach. Keep proper footing and balance at 

all times. This enables better control of the power tool in 

unexpected situations.

f.  Dress properly. Do not wear loose clothing or 

jewellery. Keep your hair, clothing and gloves away 

from moving parts. Loose clothes, jewellery or long hair 

can be caught in moving parts.

g.  If devices are provided for the connection of dust 

extraction and collection facilities, ensure these are 

connected and properly used. Use of dust collection can 

reduce dust-related hazards.

4.  Power tool use and care

a.  Do not force the power tool. Use the correct power 

tool for your application. The correct power tool will do 

the job better and safer at the rate for which it was 

designed.

b.  Do not use the power tool if the switch does not turn it 

on and off. Any power tool that cannot be controlled with 

the switch is dangerous and must be repaired.

c.  Disconnect the plug from the power source and/or the 

battery pack from the power tool before making any 

adjustments, changing accessories, or storing power