Stanley SCD20S2K - Инструкция по эксплуатации - Страница 11

11

ENGLISH

(Original instructions)

Drilling in wood

Holes in wood can be made with the same twist drill bits 

used for metal or with spade bits. These bits should be 

sharp and should be pulled out frequently when drilling to 

clear chips from the flutes.

Drilling in metal

Use a cutting lubricant when drilling metals. The exceptions 

are cast iron and brass which should be drilled dry. The 

cutting lubricants that work best are sulfurized cutting oil or 

lard oil.

LED work light

When drill is activated by pulling the trigger switch (1), the 

integrated LED work light (8) will automatically illuminate the 

work area.  

Note: The work light is for lighting the immediate work 

surface and is not intended to be used as a flashlight.

Bit tip storage

A bit storage slot (9) is built into the base of the tool.

MAINTENANCE 

Use only mild soap and damp cloth to clean the tool. Never 

let any liquid get inside the tool; never immerse any part of 

the tool into a liquid.

@

Important! To ensure product SAFETY and 

RELIABILITY, repairs, maintenance and 

adjustment (other than those listed in this 

manual) should be performed by authorized 

service centers or other qualified organiza-

tions, always using identical replacement 

parts. Unit contains no user service able 

parts inside.

ACCESSORIES

@

Warning! Since accessories, other than 

those offered by STANLEY have not been 

tested with this product, use of such acces-

sories with this tool could be hazardous. 

To reduce the risk of injury, only

STANLEY 

recommended accessories should be used 

with this product.

PROTECTING THE ENVIRONMENT

Separate collection. This product must not be 

disposed of with normal household waste.
Should you find one day that your STANLEY 

product needs replacement, or if it is of no further 

use to you, do not dispose of it with household 

waste. Make this product available for separate 

collection.

STANLEY provides a facility for the collection 

and recycling of STANLEY products once they 

have reached the end of their working life. To 

take advantage of this service please return 

your product to any authorised repair agent 

who will collect them on our behalf.
You can check the location of your nearest 

authorised repair agent by contacting your 

local STANLEY office at the address indicated 

in this manual. Alternatively, a list of authorised 

STANLEY repair agents and full details of 

our after-sales service and contacts are available on the 

Internet at: www.2helpU.com.

BATTERIES

STANLEY batteries can be recharged many times. 

At the end of their useful life, discard batteries with 

due care for our environment: 

f

Run the battery down completely, then remove 

it from the tool.

f

NiCd, NiMH and Li-Ion batteries are recyclable. 

Take them to any authorized repair agent or a local 

recycling station. 

REMARKS

Stanley's policy is one of continuous improvement to our 

products and as such, we reserve the right to modify product 

specifications without prior notice.
  •  Standard equipment and accessories may vary by 

country.

  •  Product specifications may differ by country.
  •  Complete product range may not be available in all 

countries. Contact your local Stanley dealers for range 

availability.