Skil 1016AA - Инструкция по эксплуатации - Страница 8

7

Mixer 1016

INTRODUCTION

•  This electronic mixer is intended for easily and simply 

mixing substances

•  With various mixing paddles a variety of substances 

(diferent sorts of cement blends, construction glues, 

paints, levelling compounds, inishing and dry mortar, 

etc.) can be mixed

•  The recommended blending volume depends on the type 

and state of the substance to be mixed, and the type of 

paddle used

•  Do not mix more than 40 litres of a substance at one time

•  This tool is not intended for professional use

•  Read and save this instruction manual 

3

TECHNICAL DATA 

1

TOOL ELEMENTS 

2

A

  Switch for on/of and speed control

B

  Button for switch locking

C

  Speed selection wheel

D

 Spindle

E

  Mixing paddle

F

  Ventilation slots

G

  Wrench (2)

SAFETY

GENERAL SAFETY INSTRUCTIONS

WARNING! Read all safety warnings and all 

instructions.

 Failure to follow the warnings and instructions 

may result in electric shock, fire and/or serious injury. 

Save 

all warnings and instructions for future reference.

 The 

term “power tool” in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless) 

power tool.

1) WORK AREA SAFETY

a) 

Keep work area clean and well lit.

 Cluttered or dark 

areas invite accidents.

b) 

Do not operate power tools in explosive 
atmospheres, such as in the presence of flammable 
liquids, gases or dust.

 Power tools create sparks which 

may ignite the dust or fumes.

c) 

Keep children and bystanders away while operating 
a power tool.

 Distractions can cause you to lose control.

2) ELECTRICAL SAFETY

a) 

Power tool plugs must match the outlet. Never 
modify the plug in any way. Do not use any adapter 
plugs with earthed (grounded) power tools.

Unmodiied plugs and matching outlets will reduce risk of 

electric shock.

b) 

Avoid body contact with earthed or grounded 
surfaces such as pipes, radiators, ranges and 
refrigerators. 

There is an increased risk of electric 

shock if your body is earthed or grounded.

c) 

Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of 

electric shock.

d) 

Do not abuse the cord. Never use the cord for 
carrying, pulling or unplugging the power tool. Keep 
cord away from heat, oil, sharp edges or moving 
parts.

 Damaged or entangled cords increase the risk of 

electric shock.

e) 

When operating a power tool outdoors, use an 
extension cord suitable for outdoor use.

 Use of a 

cord suitable for outdoor use reduces the risk of electric 

shock.

f) 

If operating a power tool in a damp location is 
unavoidable, use an earth leakage circuit breaker.

Use of an earth leakage circuit breaker reduces the risk 

of electric shock.

3) PERSONAL SAFETY

a) 

Stay alert, watch what you are doing and use 
common sense when operating a power tool. Do not 
use a power tool while you are tired or under the 
influence of drugs, alcohol or medication.

 A moment 

of inattention while operating power tools may result in 

serious personal injury.

b) 

Use personal protective equipment. Always wear 
eye protection.

 Protective equipment such as dust 

mask, non-skid safety shoes, hard hat, or hearing 

protection used for appropriate conditions will reduce 

personal injuries.

c) 

Prevent unintentional starting. Ensure the switch is 
in the off-position before connecting to power 
source and/or battery pack, picking up or carrying 
the tool.

 Carrying power tools with your inger on the 

switch or energising power tools that have the switch on 

invites accidents.

d) 

Remove any adjusting key or wrench before turning 
the power tool on.

 A wrench or a key left attached to a 

rotating part of the power tool may result in personal 

injury.

e) 

Do not overreach. Keep proper footing and balance 
at all times.

 This enables better control of the power tool 

in unexpected situations.

f) 

Dress properly. Do not wear loose clothing or 
jewelry. Keep your hair, clothing and gloves away 
from moving parts.

 Loose clothes, jewelry or long hair 

can be caught in moving parts.

g) 

If devices are provided for the connection of dust 
extraction and collection facilities, ensure these are 
connected and properly used.

 Use of dust collection 

can reduce dust-related hazards.

4) POWER TOOL USE AND CARE

a) 

Do not force the power tool. Use the correct power 
tool for your application.

 The correct power tool will do 

the job better and safer at the rate for which it was 

designed.

b) 

Do not use the power tool if the switch does not turn 
it on and off.

 Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired.

c) 

Disconnect the plug from the power source and/or 
the battery pack from the power tool before making 
any adjustments, changing accessories, or storing 
power tools.

 Such preventive safety measures reduce 

the risk of starting the power tool accidentally.