FLEX DW 45 18.0-EC M/2.5 Set 466824 - Инструкция по эксплуатации - Страница 27

DW 45 18.0-EC

27

6. Switch on the power tool.

The screw is screwed into the workpiece 

until the set screw-in depth is reached.

Check screw-in depth, change if required.

NOTE!

When the preset screw-in depth is reached, 

the drive is disengaged, the screwdriver bit 

stops turning 

7. When you have finished fixing screws, 

switch off the electric power tool.

At the end of work:

8. Move the direction of rotation selector (3) 

to the middle position.

Maintenance and care

WARNING!

Remove the battery before carrying out any 

work on the power tool

.

CAUTION!

Before performing any work on the electric 

power tool, move the lever for selecting 

direction of rotation (3) to the middle 

position.

Cleaning

CAUTION!

When cleaning with compressed air, always 

wear goggles.



Regularly clean the power tool and 

ventilation slots. Frequency of cleaning is 

dependent on the material and duration of 

use.



Regularly blow out the housing interior 

and motor with dry compressed air.



Regularly blow out screw magazine with 

dry compressed air.

Repairs

Repairs may be carried out by an authorised 

customer service centre only.

Spare parts and accessories

For other accessories, in particular tools 

and polishing aids, see the manufacturer’s 

catalogues.

Exploded drawings and spare-part lists can 

be found on our homepage: 

www.flex-tools.com

Disposal information

WARNING!

Render redundant power tools unusable:

-  mains operated power tool  by removing 

the power cord, 

-  battery operated power tool by removing 

the battery.

EU countries only
Do not throw electric power tools 

into the household waste! In 

accordance with the European Directive 

2012/19/EU on Waste Electrical and 

Electronic Equipment and transposition into 

national law used electric power tools must 

be collected separately and recycled in an 

environmentally friendly manner.

Raw material recovery instead of 

waste disposal.

Device, accessories and packaging should 

be recycled in an environmentally friendly 

manner. Plastic parts are identified for 

recycling according to material type.

WARNING!

Do not throw batteries into the household 

waste, fire or water. Do not open used 

batteries.

EU countries only:

In accordance with Directive 2006/66/EC 

defective or used batteries must be recycled.

NOTE

Please ask your dealer about disposal options!

Transport

The equivalent lithium content of the batteries 

included in the product package is below the 

appropriate limit values. 

Therefore the battery as an individual com-

ponent as well as the power tool and its product 

package are not subject to national or 

international dangerous goods regulations.

If several machines with lithium ion batteries 

are transported, these regulations may 

become relevant and special safety measures 

may be required (e.g. for the packaging).

In this case find out about the currently valid 

regulations for the country of use.