FLEX DW 45 18.0-EC M/2.5 Set 466824 - Инструкция по эксплуатации - Страница 22

DW 45 18.0-EC

22

Instructions for use

WARNING!

Remove the battery before carrying out any 

work on the power tool.

Before switching on the power tool



Unpack power tool and accessories and 

check that no parts are missing or 

damaged.



Attach the belt clip and bit holder with 

the enclosed fastening screw.

Inserting/replacing the battery



Press the charged battery into the power 

tool until it clicks into place.



To remove, press the release button (1.) 

and pull out the battery (2.).

CAUTION!

Protect the battery contacts when the 

battery is not being used. Loose metal parts 

may short-circuit the contacts – 

Explosion and fire hazard!

Battery state of charge



Press the button to check the state of 

charge at the state of charge indicator 

LEDs.

If one of the LEDs flashes, the battery must 

be recharged. If none of the LEDs light up 

after the button is pressed, the battery is 

faulty and must be replaced.

The indicator goes out after 5 seconds.

NOTE

Follow the instructions for charging the 

battery in the operating instructions for the 

electric power tool and the battery charger. 

Inserting the tools

Screwdriver bit

WARNING!

Remove the battery before carrying out any 

work on the power tool.

CAUTION!

Before performing any work on the electric 

power tool, move the lever for selecting 

direction of rotation (3) to the middle 

position.