FLEX DW 45 18.0-EC M/2.5 Set 466824 - Инструкция по эксплуатации - Страница 18

DW 45 18.0-EC

18

Special safety instructions

Identify the power tool with stickers only. 

Do not drill any holes into the housing.

Noise and vibration

The noise and vibration values have been 

determined in accordance with  EN 62841. 

The A evaluated noise level of the power 

tool is typically:

– Sound pressure level L

pA

: 

71 dB(A);

– Sound power level L

WA

: 

82 dB(A);

– Uncertainty K: 

3 dB.

otal vibration value (when fixing screws):

– Emission value a

h

:

<2.5 m/s

2

– Uncertainty K: 

1.5 m/s

2

CAUTION!

The indicated measurements refer to new 

power tools. Daily use causes the noise and 

vibration values to change.

NOTE

The vibration emission level given in this 

information sheet has been measured in 

accordance with a standardised test given 

in EN 62841 and may be used to compare 

one tool with another. It may be used for 

a preliminary assessment of exposure.

The declared vibration emission level 

represents the main applications of the tool. 

However if the tool is used for different appli-

cations, with different accessories or poorly 

maintained, the vibration emission may 

differ. This may significantly increase the 

exposure level over the total working period.

For a precise estimation of the vibration load 

the times should also be considered during 

which the power tool is switched off or even 

running, but not actually in use. 

This may significantly decrease the 

exposure level over the total working period. 

Identify additional safety measures to 

protect the operator from the effects of 

vibration such as: maintain the tool and the 

accessories, keep the hands warm, 

organisation of work patterns.

CAUTION!

Wear ear protection at a sound pressure 

above 85 dB(A).