FLEX DW 45 18.0-EC M/2.5 Set 466824 - Инструкция по эксплуатации - Страница 17

DW 45 18.0-EC

17

Intended use

The cordless dry wall screwdriver is 

DW 45 18.0-EC is designed

– for commercial use in industry and trade,

– for screwing drywalls, chipboard or 

fibreboard onto wood or metal using 

drywall screws,

– for screwing sheet metal or wood screws 

into interior fittings,

– to be used with suitable tools recommen-

ded by the manufacturer for this power 

tool.

The screw magazine M-DW is designed for 

the quick insertion of drilling screws, 

chipboard screws and wood construction 

screws.
The screw magazine may be used only in 

conjunction with the following battery dry wall 

screwdrivers:

– DW 45 18.0-EC

Safety instructions for cordless dry 

wall screwdrivers and screw 

magazines

WARNING!

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and 

instructions may result in electric shock, fire 

and/or serious injury. Save all warnings and 

instructions for future reference.



Hold power tool by insulated gripping 

surfaces only, when performing an 

operation where the cutting accessory 

may contact hidden wiring. 

Cutting accessory contacting a “live” wire 

may make exposed metal parts of the 

power tool “live” and shock the operator.



Hold the electric power tool securely. 

When tightening and loosening screws, 

high reaction torques may occur briefly.



Secure the workpiece. 

A workpiece is held more securely in a 

clamping device or vice than by hand.



Wait until the electric power tool has 

come to a standstill before putting it 

down. The insertion tool may jam and 

cause you to lose control of the electric 

power tool.



Wear suitable clothing. Do not wear any 

loose clothing or jewellery. Keep hair, 

clothing and gloves away from moving 

parts.

Loose clothing, jewellery or long hair may

become caught in moving parts.



Do not point the electric power tool at 

yourself or at other people nearby.



While working, do not reach into the 

screw magazine or touch the area where 

screws are being inserted.

There is a risk of injury from crushing or 

sharp-edged screws.



Use only suitable screw belts according 

to the section "Technical Data".

If other screws are used, the screw 

magazine may be damaged.

Safety instructions for handling 

batteries



Do not open the battery.  

There is a risk of a short-circuit.



Protect the battery from heat, e.g. from 

continuous exposure to sunlight, fire, water 

and humidity. 

There is a risk of explosion. 



A damaged or incorrectly used battery may 

result in the emission of fumes. Ensure 

a supply of fresh air and consult a doctor in 

the event of any physical complications. 

The fumes may irritate the respiratory 

tracts.



Liquid may leak out of the battery if the 

battery is incorrectly used. Avoid contact 

with such liquid. If contact accidentally 

occurs, rinse with water. If liquid contacts 

eyes, seek medical attention. Liquid 

leaking from the battery may cause 

irritation or burns.



Recharge batteries only with chargers 

recommended by the manufacturer. 

A charger that is suitable for one type of 

battery may create a fire hazard when used 

with another battery.



The battery may be damaged by pointed 

objects such as e.g. nails or screwdrivers 

or by external application of force. This 

may give rise to an internal short circuit, 

causing the battery to burn, smoke, 

explode or overheat.