FLEX DW 45 18.0-EC M/2.5 Set 466824 - Инструкция по эксплуатации - Страница 26

DW 45 18.0-EC

26

Operating instructions

CAUTION! 

Do not grip the rotating screwdriver head. 
Stop sleeve

Screwing in screws:

1. Insert appropriate screwdriver bit.

2. Set screw-in depth.

3. Set direction of rotation (clockwise).

4. Grip electric power tool with one hand on 

the handle and assume working position.

5. Place screw on the screwdriver bit.

The screw is held by magnetic force.

6. Press screw tip against the workpiece 

to be screwed in place until the stop 

sleeve is positioned on the workpiece. 

Hold electric power tool at right angles 

to the surface of the workpiece!

7. Switch on the power tool.

The screw is screwed into the workpiece 

until the set screw-in depth is reached.

Check screw-in depth, change if required.

NOTE!

When the preset screw-in depth is reached, 

the drive is disengaged, the screwdriver bit 

stops turning. 

8. When you have finished fixing screws, 

switch off the electric power tool.

At the end of work:

9. Move the direction of rotation selector (3) 

to the middle position.

Loosening screws:

1. Insert appropriate screwdriver bit.

2. Set direction of rotation (anti-clockwise).

3. Grip electric power tool with one hand on 

the handle and assume working position.

4. Place screwdriver bit on the screw to be 

loosened.

5. Switch on electric power tool by 

pressing the switch.

The screw is loosened.

6. After unscrewing the screw, release the 

switch.

At the end of work:

7. Move the direction of rotation selector (3) 

to the middle position.

Screw magazine

Screwing in screws:

1. Inserting screw blet.

2. Set screw-in depth.

3. Set direction of rotation (clockwise).

4. Grip electric power tool with both hands 

on the handle and assume working 

position.

5. Press depth stop (for screw length) 

against workpiece to be screwed in 

place. Hold power tool at right angles 

to workpiece surface!