Шлифмашины Bosch GWS 1000 0601821800 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
18
| English
1 609 929 Y16 | (26.3.12)
Bosch Power Tools
Products sold in GB only
: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only
: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for cutting, roughing and brushing of
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guide (ac-
cessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for
sanding with sanding discs.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1
Release lever for protection guard
2
Spindle lock button
3
On/Off switch
4
Auxiliary handle (insulated gripping surface)
5
Grinder spindle
6
Extraction hood for sanding *
7
Mounting flange with O-ring
8
Carbide grinding head *
9
Clamping nut
10
Quick-clamping nut
*
11
Protection guard for grinding
12
Grinding disc *
13
Protection guard for cutting *
14
Cutting disc *
15
Hand guard *
16
Rubber sanding plate *
17
Sanding sheet *
18
Round nut *
19
Cup brush *
20
Cutting guide with dust extraction protection guard *
21
Diamond cutting disc *
22
Handle (insulated gripping surface)
* Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 91 dB(A); Sound power level
102 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
Surface grinding: a
h
= 8.5 m/s
2
, K = 1.5 m/s
2
,
Disk sanding: a
h
= 3.0 m/s
2
, K = 1.5 m/s
2
.
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Technical Data
Angle Grinder
GWS 1000
GWS 1000
GWS 1100
GWS 1400
Article number
3 601 H21 0..
3 601 H21 4..
3 601 H21 8..
3 601 H22 0..
3 601 H24 8..
Rated power input
W
1 000
1 000
1 100
1 400
Output power
W
630
630
660
820
Rated speed
min
-1
11 000
11 000
11 000
11 000
Grinding disc diameter, max.
mm
115
125
125
125
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
OBJ_BUCH-310-006.book Page 18 Monday, March 26, 2012 2:15 PM
