AL-KO Easy Crush LH 2800 - Инструкция по эксплуатации - Страница 20

en

Working behaviour and working technique

20

Easy Crush LH 2800

DANGER!

Danger of fatal injury due to inadvertent

movement!
Inadvertent  movements  can  lead  to  ex-

tremely serious injuries!
Do  not  reach  into  the  hopper  or  ejector

chute, while the machine is connected to

mains.

CAUTION!

Damage to the machine due to improper

operation!
Incorrect handling can result in machine

damage!
Only  feed  materials  to  be  shredded  af-

ter the machine was switched on. Do not

feed  materials  to  be  shredded  after  the

machine was switched off.

WARNING!

Risk of injury due to revolving tools!
Revolving tools can cause severe hand

and finger injuries!
When working on the cutting tool, discon-

nect  the  machine  from  the  mains  con-

nection and wait for the tool to stop mo-

ving.

WARNING!

Risk of injury due to long materials to be

shredded!
Longer  materials  to  be  shredded  can

strike out and cause injuries!
Maintain sufficient safety distance.

WARNING!

Risk of injury due to negligence!
Loss  of  balance  due  to  negligence  can

cause most severe injuries!
Never feed the shredder from an eleva-

ted position.

DISPOSAL

Do not dispose of worn-out machines

or spent batteries (including recharge-

able batteries) in domestic waste!

The packaging, machine and accessories

are made from recyclable materials and

must be disposed of accordingly.

TROUBLESHOOTING

Malfunction

Possible cause

Solution

Direction of rotation switch in zero

position.

Turn the direction of rotation switch

to the left or right.

Grass catcher missing or not lo-

cked.

Push grass catcher in completely

and lock it.

Mains socket (house installation)

defective.

Use different mains socket.

Motor does not start.

Extension cable defective.

Check cable and replace it as nee-

ded.

Direction of rotation of the cutting

drum incorrect.

Turn direction of rotation switch to

the left (normal operation mode).

Grass catcher overflowing (mate-

rial backing up in the cutting drum).

Empty grass catcher.

Machine does not pull in

materials to be shredded.

Cutting drum clogged with wet ma-

terials to be shredded.

Remove clogging by feeding

branch material.