Bosch 0.600.861.900 - Инструкция по эксплуатации - Страница 15

 English | 

15

Bosch Power Tools

F 016 L81 219 | (1.4.15)

Maintenance and Service

Maintenance, Cleaning and Storage



Before any work on the machine (e. g. maintenance, 
changing the tool, etc.) as well as during its transport 
and storage, lock the On/Off switch in the off position. 

There is danger of injury when the On/Off switch is unin-
tentionally actuated.



Always remove the blade before any work on the ma-
chine.



For safe and proper working, always keep the machine 
and ventilation slots clean.

Clean the saw blade holder preferably with compressed air or 
a soft brush. Remove the saw blade from the power tool for 
this. Ensure proper operation of the saw blade holder by ap-
plying a suitable lubricant.

Heavy contamination of the machine can lead to malfunc-
tions. Therefore, do not saw materials that produce a lot of 
dust from below or overhead.

Store the power tool in a secure, dry place, out of the reach of 
children.

Do not place other objects on the power tool.

After-sales Service and Application Service

www.bosch-garden.com

In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of 
the machine.

Great Britain

Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange 
the collection of a product in need of servicing or repair. 
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au

Excessive vibra-
tions/noise

Power tool defective

Contact Service Agent

Sawing time per bat-
tery charge too low

Blade holder area needs cleaning

Hold the tool to point to the ground and start to operate

Saw blade has worn

Change saw blade

Poor sawing technique

see “Working Advice” (figure 8)

Battery not fully charged

Recharge battery; also see “Battery Charging”

The saw blade is run-
ning slow

Battery is getting discharged

Recharge battery; also see “Battery Charging”

On/Off switch is not fully pressed

Fully press On/Off switch

Overloaded during operation

Reduce pressing force of tool against branch

Green and red LED 
flash alternately

Battery temperature is out of charging range Increase or reduce the battery temperature to within the 

specified range between 0 ° C and 45 ° C

Red LED flashes 1x

Battery voltage is too low, battery is empty Recharge battery; also see “Battery Charging”

Red LED flashes 2x

Battery temperature is out of operating 
range

Increase or reduce the battery temperature to within the 
specified range between –15 ° C and +65 ° C

Red LED flashes fast 
5x

Overload (jammed blade)

Reduce pressing force of tool against branch

Operate tool before the blade touches the branch

Problem

Possible Cause

Corrective Action

OBJ_BUCH-1453-005.book  Page 15  Wednesday, April 1, 2015  2:21 PM