Roborock S7+ Robotic Vacuum Cleaner (S7P02-02) - Инструкция по эксплуатации - Страница 33

034

Common Issues

Scheduled cleaning is not working

•

Keep the robot charged. Scheduled cleaning can only begin when the battery level is 

above 20%.

Is power always being drawn when the 

robot is on the charging dock? 

•

The robot will draw power while it is docked to maintain battery performance, but 

power consumption is minimal.

Does the robot need to be charged for 

at least 16 hours the first three times it is 

used?

•

No. The robot can be used any time after it has been fully charged.

No or little water during mopping

•

Check whether there is water in the water tank and use the mobile app to set the 

scrub intensity or check the manual for full instructions on how to correctly install the 

mop cloth and mop cloth mount.

Cleaning does not resume after  

recharging 

•

Make sure that the robot is not in DND mode. DND mode will prevent cleanup. When 

cleaning a space requiring a top-up charge, if the robot was placed manually on the 

charging dock before it returned to the dock automatically, it will not be able to con-

tinue cleanup.

The robot cannot return to the charging 

dock after Spot cleaning or when it has 

been moved manually

•

After spot cleaning or a significant position change, the robot will re-generate the 

map. If the charging dock is too far away, it may not be able to return to recharge 

and must be placed on the charging dock manually.

The robot has begun to miss certain spots

•

The wall sensor or cliff sensors may be dirty. Wipe them with a soft dry cloth.

It takes a long time to fill the water tank

•

The filter may be blocked and need cleaning. 

Problem

Solution

Poor cleaning ability or dust falling out 

•

The dustbin is full and needs emptying.

•

The filter is blocked and needs cleaning.

•

The main brush is jammed and needs cleaning.