Roborock S7+ Robotic Vacuum Cleaner (S7P02-02) - Инструкция по эксплуатации - Страница 15

016

Mopping the floor

Note:

To prevent excessive buildup of dirt on the mop, floors should be vacuumed at 

least three times before the first mopping cycle.

1. Remove the water tank

2. Fill the water tank

Release the water tank latch and slide the tank backward.

Open the water tank, fill it with water, and close it tightly.

Note:

•

Fill with water only. Cleaning fluids and/or disinfectants may corrode the water tank.

•

Use cold/room temperature water only. Hot water may cause water tank deformation.

3

Power on and charge the robot

For details on how to use the dock, 

please refer to Roborock Auto-Empty 

Dock User Manual.

Press and hold the   button to power on the robot. When 

the power light goes on, place it on the dock to charge. To 

maintain the performance of the high-performance lithium-ion 

rechargeable battery pack, keep the robot charged.

Note:

The robot may not turn on when the battery is low. In this case, place the robot 

directly onto the dock to charge.

2

1

The power indicator color 

indicates the battery level:

•

White: Battery level 

≥

 20%

•

Red: Battery level < 20%

Installation