Roborock S7+ Robotic Vacuum Cleaner (S7P02-02) - Инструкция по эксплуатации - Страница 22

023

Routine Maintenance

To maintain optimum performance, maintain the robot according to the following guidelines:

Part

Maintenance  

Frequency

Omni-Directional 

Wheel

Use a screwdriver or similar tool to pry out the axles. 

Rinse, allow to dry and press the wheel back in place. 

As required

/

Charging Contacts (Robot)

Wipe clean with a soft dry cloth.

Monthly 

/

Cliff Sensors

Wipe clean with a soft dry cloth.

Monthly

/

Main Brush

Rotate the fasteners of the main brush caps in the 

unlocking direction and take them down. After removing 

the debris wrapped around the brush, reinstall the main 

brush caps in the locking direction.

2 weeks 

6-12 months

Charging Contacts 

(Charging Dock)

Wipe clean with a soft dry cloth.

Monthly 

/

Carpet Sensor

Wipe clean with a soft dry cloth.

Monthly

/

Washable Filter 

2 weeks 

6-12 months

Remove and rinse, gently tapping to remove any dirt.  

Air-dry for at least 24h before reuse.

Use a screwdriver to unscrew the side brush. Remove any 

entangled dirt and screw it back in place.

Side Brush 

Monthly

3-6 months

Remove and clean the mop cloth after each use.

VibraRise Mop Cloth

After each use

3-6 months

Dock Locator

Wipe clean with a soft dry cloth.

Monthly

/

Main Wheels

Wipe clean with a soft dry cloth.

Monthly

/

Replacement  

Frequency

Maintenance Method

Note:

Replacement frequency will vary depending on the actual situation. Should abnormal wear and tear occur, replace the relevant part.