Roborock E452-02 - Инструкция по эксплуатации - Страница 28

FAQs

Problem 

Solution

Cleaning does not resume after recharging

The robot cannot return to the Charging Dock after spot

cleaning or when it has been moved manually.

Make sure that the robot is not in DND mode. DND mode will prevent cleanup. When cleaning a space

requiring a top-up charge, if the robot was placed manually on the Charging Dock before it recharged

automatically, it will not be able to continue cleanup.

After spot cleaning or a significant position change, the robot will re-generate the map. If the Charging

Dock is too far away, it may not be able to return for recharging and must be placed on the charger manually.

The robot has started missing certain spots

The Obstacle Sensor may be dirty. Clean it with a soft dry cloth.

No or little water during mopping  

Please check whether there is water in the water tank, rinse the mopping cloth, replace the filter or follow the

instructions in the user manual to correctly install the mopping cloth.

Too much water during mopping

Please make sure that the water tank cover and the filter are properly installed in place.

24