Maxwell MW-3290 - Инструкция по эксплуатации - Страница 20

20

ENGLISH

If  the  amount  of  water  coming  out  of  the  water  tank 
has  significantly  decreased  (the  cloth  is  no  longer 
sufficiently  moistened),  the  filter  may  be  clogged 
(the filter element turns yellow), you need to clean or 
replace the filter. 
Perform  the  following  actions  to  clean  (or  replace) 
the filter:

 •

Remove  the  microfiber  cloth  (40)  from  the 
attachment (39), and you will see two plugs with 
filter elements installed on the water tank. Take 
the staples of the plug on both sides, as shown 
in  the  pictures,  and  remove  it  together  with  the 
filter element. You can also use the backside of 
the cleaning brush for removing the plug.

filter

water tank plug

Use the backside of the cleaning brush for removing 
the filter element.

 •

Push  the  filter  element  out  of  the  plug  on  the 
side of the groove with the flat side of the brush.

 •

Wash  the  filter  element  in  clean  water,  slightly 
pressing on its cylindrical side, and install it back 
to its place.

Install the filter element on the plug from the groove 
side squeezing it slightly with tweezers.

 •

Install  two  plugs  with  the  filters  back  into  the 
water  tank  and  slightly  press  on  them  for 
tighter fit.

 •

Now the attachment is ready for use.

Removing battery

 •

Before  you  dispose  of  the  vacuum  cleaner, 
remove  the  battery  and  apply  to  the  corre-
sponding  center  for  recycling  of  it.  Do  not 
burn  the  vacuum  cleaner  even  if  it  is  badly 
damaged  without  removing  the  battery  to 
avoid the battery explosion.

 •

It  is  recommended  to  remove  the  battery  for 
long storage of the vacuum cleaner.

 •

Unscrew  the  fastening  srew  of  the  battery  lid 
(7) and remove the lid.

 •

Detach the socket and remove the battery.

 •

Install the lid (7) back to its place and tighten 
the fastening screw.

STORAGE

 •

Before  taking  the  vacuum  cleaner  away  for 
long term storage, clean its body, the dust bin 
(29) and the filters (27, 28).

 •

Remove  the  batteries  from  the  remote  con-
trol.

 •

Use the original package for storage.

 •

Keep the vacuum cleaner in a dry cool place 
out  of  reach  of  children  and  disabled  per-
sons.

Possible troubles and troubleshooting

№

Malfunction

Possible causes

Solution

1 The battery doesn‘t 

charge.

Mak sure that you use the original 

power adapter.

Use the original power adapter.

The vacuum cleaner is set im-

properly on the charging station.

Make sure that the contact points for bat-

tery charging on the vacuum cleaner body 

and on the charging station are clean. If 

necessary, wipe the contact points.

Slightly move the vacuum cleaner body 

by hands to provide better contact with 

the charging station.

The power adapter of the charg-

ing station is not connected to the 

mains socket, the charging sta-

tion indicator does not glow.

Connect the charging station and plug 

the power adapter to the mains socket. 

Make sure that the charging station 

indicator glows.