Пылесос Polaris PVCR 1226 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
30
manner.
7.
Given a severe clogging of components of the brush and electric drive, contact an authorized service
center for disassembling and cleaning.
CLEANING THE LATERAL BRUSHES (Fig. 25)
6.
Turn off the vacuum cleaner.
7.
Check the brushes for any defects and / or foreign items, as well as debris having wound around.
8.
If necessary, detach the brushes.
9.
Wipe the brushes with a piece of cloth preliminary soaked in hot water and well wrung. Perform the
cleaning each time after vacuuming.
10.
Given any damage to the lateral brushes, timely replace them.
CLEANING THE SENSORS AND CONTACT LEADS
- Make sure to keep the frontal wheel free from debris accrual.
- To remove dust from the fall sensors wipe them with a piece of soft cloth provided exertion no mechanical
impact. (Fig. 26)
- Use a piece of dry soft cloth to wipe the contact leads at the vacuum cleaner bottom, or on the base (Fig.
27)
- Disconnect the electric battery at a long-term idleness of the device.
Any works regarding cleaning external parts of the vacuum cleaner are beyond the warranty service.
TROUBLESHOOTING
The Table contains the most usual problems which may arise during operation the device. Depending on a defect
reason, you can hear 1 to 4 beeps.
