Bosch BGS412234A - Инструкция по эксплуатации - Страница 52

52

* Dependent on model 

e) 

 Put the lid back on the dust container so that it 
clicks into place.

f) 

Inser t the dust container into the appliance.

Maintaining the dust-collection system

Figure 

24*

Your appliance is equipped with a Smar tSensor Con-
trol indicator. This function constantly monitors whe-
ther your vacuum cleaner is working at its optimum 
power level. 

The indicator lights up blue when the appliance is wor-
king optimally. If the indicator turns red and flashes, 
the plate filter needs to be cleaned. The appliance is 
automatically adjusted back to the lowest power set-
ting.

Cleaning the filter in the dust container

Switch off the appliance.

Figure 

25

‡

Remove the dust container from the appliance. 

Figure

23

a) 

 Open the bottom plate of the dust container by 
pulling on the lower catch.

b) 

 Fold out the filter car tridge with filter foam.

c) 

 Remove the filter foam from the bottom plate of the 
dust container. 

d) 

Tapping out the filter foam is all that is required to be 
able to stop the suction process. 

e) 

Then clean the filter foam under running water. 

f) 

  Alternatively, the filter can be cleaned in a wa-
shing machine at max. 30 °C using a gent-
le programme and the lowest spin speed. 

TIP: 

 To protect the filter, place it in a laundr y bag.

g) 

Allow the filter foam to dr y completely for at least 24 
hours and then place both filters back in the bottom 
plate of the dust container.

h) 

Close and lock the bottom plate.

i) 

Inser t the dust container into the appliance.

Maintaining the exhaust filter

The exhaust filter is designed so that it does not need 
to be replaced, provided the appliance is used as inten-
ded in the household.
To ensure that the vacuum cleaner is working at its op-
timum power level, the exhaust filter should be washed 
after one year. The filtering action of the filter remains 
intact, even if the filter sur face becomes discoloured.

Figure 

26*

a) 

Open the rear flap by pressing on the release button.

b) 

Pull the locking tab in the direction of the arrow to 
release the (H)EPA filter and remove it from the ap-
pliance.

c) 

Remove the filter foam from the rear flap.

d) 

Tap out the filter unit and filter foam and rinse them 
under running water. 

   Alternatively, the unit can be cleaned in a wa-

shing machine at max. 30 °C using a gent-
le programme and the lowest spin speed. 

TIP:

  To protect other laundr y items, put the filter unit 

into a laundr y bag.

e) 

Once the (H)EPA* filter has dried completely (at 
least 24 hours), inser t it back into the appliance and 
lock it in place. 

f) 

Inser t the filter foam and close the rear flap.

After vacuuming fine dust par ticles (e.g. gypsum, ce-
ment, etc.), clean the motor protection filter by tapping 
it out or, if necessar y, replace the motor protection fil-
ter and exhaust filter.

Cleaning instructions

Always switch off the vacuum cleaner and unplug the 
mains plug before cleaning the vacuum cleaner. The va-
cuum cleaner and plastic accessories can be cleaned 
with standard plastic cleaner.

!

 Attention: 
   Do not use abrasive cleaning products, glass clea-

ner or multi-purpose cleaning products. Never im-
merse the vacuum cleaner in water.

Subject to technical modifications.